RFID car alarm system, push-button start/stop button, ignition lock, immobilizer with keyless remote-go entry system, 12V

RFID car alarm system, push-button start/stop button, ignition lock, immobilizer with keyless remote-go entry system, 12V Description

RFID Car Alarm System Push-Button Start/Stop Lock Ignition Immobilizer with Keyless Remote-Go Entry System 12V Description
Operating Instructions: Anti-theft mode: 15 seconds after each shutdown, Host 1 will tweet, indicating that the system is in anti-theft mode. Pressing the start button will then turn off the lights, disable all car power, and prevent starting. Anti-theft mode: When the ID card is within range of the proximity sensor coil, Host 2 will tweet to deactivate anti-theft mode.
Exit anti-theft mode: When the ID card is within range of the car's induction coil, Host 2 will tweet, indicating that the anti-theft status has been revoked. The start button will immediately power on, and the vehicle can be started at any time. One button to start: Press the foot brake, then press the start button shortly after releasing it; the vehicle will start automatically after 0.5 seconds. One button to turn off: Press the foot brake, then briefly press the start button once after releasing it; the vehicle will turn off immediately. One button to activate the sound: Without pressing the foot brake, briefly press the button to activate the sound; this button functions like the key to the first sound. Brake light output form: Each brakes after the first brake light flashes 4 times and then stays on for a long time, loose feet off.
Note: When installing a key, insert the key into the ACC file to restore the original car steering lock, this time to the original car lock behind the spark plug connector to prevent the key from being inserted into the ACC file when the original car audio power is off. Flashing brake light output: = 12V (Note: The output time is controlled by the foot brake).
One button to open the instrument panel: without pressing the foot brake, it will open based on the tone, and then press the button to open the instrument panel. The instrument panel will then function when the key is inserted into the 2