Ring Full Cover Protective Film Accessories Adapter Ring Sticker

Ring Full Cover Protective Film Accessories Adapter Ring Sticker Description

Warm Tips: 1: Due to different cutting positions, the display effect of some patterns after sticking is different. Please take the actual sticking as the standard. Mind carefully the pattern model. means approval. We do not accept returns for the reason that the pattern is not connected.
2: The film design of some models prevents warping. The edge position is specially left with a distance of about 1MM. This is a normal phenomenon and not a mold opening problem. Please be aware of it.
Applicable models: FTZ 2nd generation adapter. Film type: sticker. Film features: Scratch-
[FAQ]. Q: Is it easy to use? A: The stickers have been cut and each sticker comes with a tutorial. There are spare stickers for the difficult places to apply on the camera. If you don't apply it well, you can gently peel it off and apply it repeatedly. As long as you have patience, you can easily complete it. Q: What skills are required?
A: 1: Before applying the sticker, you need to wipe and clean the body, and there should be no oil and dust. After it is dry, study the corresponding positions of each hole. 2: The correct order for most of the stickers is: start from the top, apply the front and rear holes from large to small, first apply the parts with more holes, then the small areas, and finally the skin position. After the corners and are applied, a hair dryer needs to be heated and pressed to make them more adherent

Q: Do you need additional tools? A: Each set of stickers comes with a sticker tool kit (wiping cloth, alcohol bag, dust removal stickers, tweezers), and some curved skin corners need to be heated with a hair dryer.
Q: there be residual glue left after tearing it off? A: After applying the film, a small amount of glue may fall off due to collision, friction, etc. during the use of the camera. This film uses removable glue (different from permanent glue), and you can use the torn film to repeatedly to this part.
Q: the film damage the machine? A: The film is used to protect the machine. It is light and beautiful, and it can also prevent the machine from losing paint, wear, and scratches. However, among tens of thousands of pasting cases and testing processes, only 2-3 models (such as lenses, Z6, and some machines) have experienced paint loss. It is not ruled out that it is caused by friction and collision during use after pasting or the quality of the paint on the body itself.
Q: What should I do if the film is broken or a part is severely worn and needs to be repaired? A: Most models are equipped with spare films for the parts that are difficult to stick, which greatly enhances the fault tolerance
Color: Black
Material: plastic

Package Contents:
1 * Full Cover Protective Film

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.