Scanner OPCOM 2012V Can OBD2 Car Diagnostic Interface Tester Oper Firmware V1.99 USB Black

Scanner OPCOM 2012V Can OBD2 Car Diagnostic Interface Tester Oper Firmware V1.99 USB Black Description

Interface Diagnostic Tester, Car OPCOM 2012V Can OBD2 Oper Firmware V1.99, USB, Black Features: Provides detailed status information (current, absent, intermittent); You can print, save or copy fault codes to any other application; You can directly access the measuring block menu from the fault code menu; Display information from several control modules; Can display 8 measurement parameters simultaneously; The sampling frequency is highly dependent on the communication protocol. 1. Covers almost all Opel cars, even new cars with CAN-BUS diagnostic function, such as Vectra-C, Astra-H, Zafira-B. 2. The program allows you to read and clear fault codes, display real-time data and perform output tests. 3. The program supports many control units, such as engine, automatic transmission, ABS, airbag, engine cooling module, dashboard, electronic climate control, body control unit, etc. 4. Since Opel uses multiple pins in the OBD connector, the diagnostic interface acts as a multiplexer and selects the correct pin for communication. PIN3, PIN7, PIN8, PIN12 = serial reference (ISO9141, KW81, KW82, KWP2000) 5. The error code will be displayed with all available information: Full text description of the error code: 1) All status information (present, absent, flashing) 2) You can print, save or copy the error codes to any other program. You can directly access the measurement block window from the error code window. 3) The program will display the measurement information of many control module blocks, which you can select yourself from the list. 4) The program can simultaneously display 8 parameters of the measuring block. The sampling frequency is highly dependent on the communication protocol. For example, older systems such as Omega-B X 25 DT motors (ISO-9141-2) can be very slow in the communication process, while newer Multec or Bosch units are faster (using KWP-2000) and the latest CAN-based control. the device is very fast! You can also perform multi-controller output tests. PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - High speed 2-wire CAN-BUS, 500kb/s MSCAN - Medium speed 2-wire CAN-BUS, 95kb/s SWCAN - Low speed single-wire CAN-BUS, 33.3kbps Packing List: 1PC x OP COM Port 1PC x USB Cable 1PC x Software and Drivers CD Note: Only supported 32-bit operating systems Win XP and Win 7, other systems are not supported.