Smart RFID car alarm system with engine start/stop button, immobilizer, and keyless entry remote control

Smart RFID car alarm system with engine start/stop button, immobilizer, and keyless entry remote control Description

Operating Instructions: Anti-theft mode activation: 15 seconds after each power-off, the system enters anti-theft mode (signal 1). The start button indicator light turns off, the vehicle's power is cut off, and any attempt to start the vehicle is impossible. Anti-theft mode deactivation: When the identification sensor is near the vehicle, within the area of the induction coil, the system emits a beep (signal 2) indicating that anti-theft mode is deactivated. The start button indicator light flashes immediately, and the vehicle can be started at any time. Keyless start: Briefly press the start button (signal 1) after pressing the brake pedal, then release it. The vehicle starts automatically after 0.5 seconds. Keyless stop: Briefly press the start button after pressing the brake pedal, then release it. The vehicle stops immediately. Keyless audible activation: Without pressing the brake pedal, briefly press the start button to activate the audible signal. The function is the same as for a normal press of the key. Keyless dashboard unlocking: without pressing the brake pedal, the dashboard opens to a beep, then press the start button. The dashboard opening button, and then the dashboard power-up, works like a simple press of the button in the second file.
Parameters: Operating voltage: 12V DC (not compatible with 24V power supply). Standby current: 8mA (Note: continuous standby time up to one month). Button indicator: blue light (Note: the blue light turns off in anti-theft mode, it flashes after anti-theft mode is deactivated). Activation of anti-theft mode: after 15 seconds of the vehicle being stopped, the system automatically locks the engine, cuts the ignition, and the button indicator turns off.
Deactivation of anti-theft mode: inside the vehicle, use the proximity sensor of the identification card; The control unit emits two signals to deactivate the anti-theft mode. Brake light flashing voltage: 12V DC (Note: the flashing duration is controlled by the brake pedal). Brake light operation: after each braking, the brake lights flash four times, then remain illuminated until the pedal is released. Alarm: brake light alarm. In case of illegal braking, the brake pedal illuminates. Flashing warning light for 15 minutes.