SW3518 100W Full Protocol High-Power Fast Charge Module Voltage Current Fast Charge Protocol Display Module QC4.0 PD3.0

SW3518 100W Full Protocol High-Power Fast Charge Module Voltage Current Fast Charge Protocol Display Module QC4.0 PD3.0 Description

1. Max 100W output power, support PPS/PD/QC/AFC/FCP/SCP/SFCP/VOOC and other fast charging protocols
2. Support the fast charge output of port A or C port, only support the pressure reduction
3. Input voltage 6 ~ 32V, it is recommended to use 24V power supply to achieve 20V output
4. Support the extension display or multiple power board superposition

Instructions Compatible?with use:
Power supply through 5.5x2.1mm power sockets, or to connect to the power supply by yourself. power supply
The voltage range is 6 ~ 32V.
Because it is a lower voltage power supply, the input voltage must be greater than the output voltage. If you want to output 20V
It is recommended to enter 24V.
After inserting the power supply, the red indicator lights , and the USB A port will have 5V power output.
If you insert a device with fast charge, such as mobile phones, power seductors, etc., the indicator lights are
Starting, it means entering the fast charge mode. Output voltage current is adjusted by equipment such as mobile phones or seductors
Festival.
If there is a fast charge display board, you can know the charging voltage and charging current through the screen
Charging protocols, input voltage and other parameters. Through the the side, 3 display methods can be changed.
Colour:
Material:PCB

Package Contents:
1 x Full protocol high -power fast charge module