TFmini-S Lidar Single-Point Micro-Type RangingFinder Module for Pixhawk 4.5-6V UART I2C Interface TFminiUpgraded

TFmini-S Lidar Single-Point Micro-Type RangingFinder Module for Pixhawk 4.5-6V UART I2C Interface TFminiUpgraded Description

Major Applications: Traffic Monitoring, Obstacle detection, Level measurement, device, Security and obstacle avoidance, Drone altitude holding and terrain following, Machine control and safety sensors, Distance measuring instrument
TFmini-S is the improved version of TFmini, it is a single-point micro-type ranging module and could be widely used in the integrated application of various drones, UAVs, Robots and industrial equipments. It is based ToF ( of Flight) principle and integrated with unique optical and electrical designs, so as to achieve stable, precise, high sensitivity and high-speed distance detection.
Communication interface:UART/I2C
Electromagnetic Compatibility(EMC):EN 55032 Class B

Operating Range:0.1-12m
Maximum operating range at 10% reflectivity:5m
Applicable voltage range:4.5-6V
Average power consumption:0.12W
FOV:2
Baud rate:115200
Data bit:8
Stop bit:1
Parity bit:0
Minimum resolution ratio:5mm
Frequency:100Hz(1-1000Hz adjustable)
Light source:VCSEL
Wavelength:850nm
Operating temperature:20-60
Light sensitivity:70,000lux
Accuracy:1% (less than 6m),2% (6m-12m)
Size:42mmx15mmx16mm
Weight:6.1g
FAQ
Q1: Is TFmini-S available with 3.3V or other power supply voltage?
A1: Sorry, it is not available for the being. The Standard power supply of TFmini-S is 5V0.1V.
Q2: TFmini-S will heat after operating for a while. Is it broken?
A2: This is the normal operating condition of the product. The temperature of the chip and circuit board will slightly after a continuous operation, which is a normal case.
Q3: Can TFmini-S be connected with for or for Raspberry Pi for use?
A3: Yes, it can. TFmini-S adopts serial communication protocol so that it can connect to any control board supporting