Product Images
Sorry, this item is temporarily out of stock.
Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position With 2 Keys
Brand Tlily
New
Similar Products we think you'll like
Would you like us to let you know when it's back?
Description & Details
Summary
- 1. Disconnect all power(AC& DC)Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
- 3. Connect Positive and Lamp negative feed wire.Connect the DC.power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a DC negative bus
- bar.
- 4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
- 5. Mount the switch panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& DC powers to supply power to the panel. Turn on and off all branch circuits to check if the panel works normally.
Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position With 2 Keys Description
1. Disconnect all power(AC& )Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
3. Connect Positive and Lamp negative feed wire.Connect the .power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a negative bus
bar.
4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
5. Mount the panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& powers to supply power to the panel. Turn and off all branch circuits to check if the panel works normally.
Ratings: 12V
Panel Rating: 10 A
Product Dimensions: (W x H) 69 x 69mm
Colour: Black
Material: nylon + metal
Package Contents: 1* Ignition Panel
2* key
Details
| OPC | PTNQ5VT |
|---|---|
| Brand | Tlily |
| Codes | 6031995418291 (EAN) |
Product Data
| Height | 7.5cm |
|---|---|
| Width | 7.5cm |
| Length | 8.5cm |
| Weight | 0.1465kg |
| Colour | Black |
| Material | nylon + metal |
Would you like us to let you know when it's back?
Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position With 2 Keys
New
You might also like