Universal code cloner / garage door remote control 433 MHz 2-pack

Universal code cloner / garage door remote control 433 MHz 2-pack Description

Code cloner for an extra spare remote control: RF code cloner in remote control design to clone your old remote control codes. Perfect for transferring/copying the code for garage doors, automatic gates, security systems and household appliances.

Always have a backup on hand: Copy the functions of your original remote with this 4-channel RF duplicator with learning functions, so you always have a backup or extra garage door opener on hand.

Perfect for the garage door: Compatible with fixed frequency of 433 MHz, which is the frequency that most garage door openers use.

Compatible with the following chipsets: 2260 (all manufacturers) 2262 (all manufacturers) PT2264, 5326 (all manufacturers) SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers)1527 (all manufacturers) 2240 (all manufacturers) HCS101, HCS200 \ HCS201 (parts of the code) HCS300 \ HCS301 (parts of the code) Singlechip parts.

NOTE: This model is not suitable for rolling code. In that case, you should get a different model. Cannot copy the car alarm box (for security reasons).

Specification:

Signal transmission speed: 50-60 KHz
Voltage: 12 V
Current: 10 mA
Frequency: 433MHz
Signal transmission power: 10-12 mW
Signal transmission distance: Up to 50 m in open space
Color: Black/silver
Battery: 2V27A battery (included)
Size: 6x4x1.2cm
Weight: 28g

The package includes:

Universal code cloner - remote control

How to copy:

Step 1: Remove the old code from the duplicator

1. Press buttons A and B continuously until the LED flashes

2. Release button B (continue pressing button A) and slowly press button B 3 times, LED flashes

3. Release button A, code deletion is complete

Step 2: Copy code from original transmitter

1. Place the duplicator as close to the original transmitter as possible.

2. Press and hold button A on the original transmitter, press and hold button A on the duplicator, until you see the duplicator LED flash.

3. Release both buttons, finish code copying. Copy the next button in the same way.

Reset function:

Hold down buttons C and D for 3 seconds, LED flashes, all buttons revert to the last copied codes.