Universal garage door wireless remote switch receiver, 2 channel

Universal garage door wireless remote switch receiver, 2 channel Description

Universal multi-frequency 300-868mhz garage door receiverSpecifications:1) Name: Universal receiver SMG-662.2) Operating voltage: 9V-30V3) Channel: 2. 4) Frequency: 300MHz - 900MHz.5) Distance: 30-50 meters.6) Very small size: 5.5cm*4.5cm*1.0cm.7) One receiver with 400 codes can work.8) Does not interfere with other remote controls and receivers.9) Brand selector: Using 8 dip switches, the user can combine different remote controls of different brands.10) Code: Rolling and Fixed code amplifier; Learning code.11) Usage: The receiver is designed to control any gate automation system, burglar alarm system, electric doors, windows, lifting equipment, gates, lifting devices. It is easy to use, beautiful in appearance, low power consumption and easy to connect to the existing system.12) Power input selector: This receiver can work at AC/DC 9V-30V. However, it is better to change the PIS according to the power input. If the input is greater than 24V, please short pin 2&3; short pin 1&2 if the input is less than 24V.Working frequency: 300-900MHz (Rolling code amplifier; Fixed code)300MHz310MHz315MHz318MHz390MHz 433.4MHz433MHz433.92MHz868MHz868.3MHz868.8MHzCan identify ALL fixed code (2262, 2260, 2264, 5326, M1E, M5E). Full learning code (1527, 2240, 6P20B, 6P20D etc.), Rolling code (HCS301, HCS300,HCS200, HCS201, HCS100, HCS101), Branded remote controls (ATA PTX4, APRIMATIC, B, BALLENICCA, BALLENIC DITEC, DEA, C ME, DITEC, DOORHAN, ECOSTAR, ERREKA, FOX, GIBIDI, HORMANN, LIFTMASTER, MHO SE, MOTORLINE, MUTANCODE, N CE, NOVOFERM, PUJOL, SEAV, SOMMER, VDS) many other major brands in the market Include 1 receiver 1 x small antenna 1 x English manual Programming a new remote control 1) Select the correct brand of remote control by moving the DIP switches UP or DOWN. For example, 433.92Mhz Marantec remote controls, simply move Dip-switch 7 UP. 2) Press the learning button. The will LED will turn on. 3) Press the remote control button, the LED will flash 4 times. This means that the remote control has been successfully programmed. 4) Repeat step 2 with the other button. 5) The procedure for programming the 2nd channel is the same. Delete all data from the memory card: press and hold any learning button. The LED will start flashing. Keep this button pressed until the LED turns off. All data stored on the memory card will be permanently deleted and cannot be restored.