Universal rubber for bumper Samurai, 2.5m

Universal rubber for bumper Samurai, 2.5m Description

Easy to assemble Strong and durable Suitable for most cars (sometimes minor modifications are required, as it is a universal tape) A great solution for people who care about the aesthetics of their car. The rubber strip will optically lower the car. This will change the appearance of the car. This rubber will allow the car to stand out in everyday traffic and attract attention. In addition, it will protect sensitive elements from splashes from under the wheels and the bumper when trying to drive over a high curb. SPECIFICATION Length: 2.5 meters Width: 4.5 cm Color: Black Material: high-quality rubber Brand: Samurai The set includes: 1x tape, 2.5 meters long, black 1 x cloth for degreasing the surface 8 x optional mounting screws 1 x Samurai sticker INSTALLATION Attention! It is recommended to install the belt in favorable weather conditions. Remember not to touch the adhesive surface. This affects adhesion. 1. Thoroughly clean and degrease the edge and the area where you want to stick the tape. 2. Heat the entire roll of tape, e.g. with a hair dryer, until the rubber band softens. (Heating the glue will make the bond much stronger. Skipping this step will significantly weaken the glue). 4. Slowly peel off the adhesive backing and stick it to the area to be decorated. After sticking the tape, press it firmly with your fingers. 5. Cut off the excess tape. 6. Heat the tape, e.g. in a dryer, and press the tape to the selected element several times. The tape sticks after 24 hours! Before this time expires, make sure that the belt does not come into contact with water and do not drive at high speed.