USB to 34-pin to 26-pin floppy disk converter cable

USB to 34-pin to 26-pin floppy disk converter cable Description

USB to 34-Pin to 26-Pin Floppy Disk Converter Cable Description
The 26P connector on this adapter card is a 1.0 mm pitch drawer connector, the 34P connector is a 2.54 mm pitch socket.
With this card, you can convert a 26P 1.0 mm interface floppy disk drive into a standard 34P 1.44 MB floppy disk drive or a simulated floppy disk drive. After testing, it can be used normally.
Easy data transfer between computer and floppy disk drive
System: Supports WinXP, WinME, Win7 32-bit, Win7 64-bit, Win10
Note:
This cable does NOT improve the read/write speed of floppy disks.
For 1.44 MB floppy disks only. Reliable and efficient.
When wiring, pay attention to the sequence markings of each interface. The cable cannot be used if connected incorrectly.
If the number 1 on the 1.0 mm FFC/FPC 26P soft cable of the device/computer does not match the number 1 on the adapter card, this means that the 26P soft cable is incorrect and must be replaced. There are two types: the rectified cable and the reverse-biased cable. To see if the soft cable fits, you can compare it to the 26P interface in the picture. The actual picture shows a 1.0 mm 26P drawer connector from above. The silkscreen printing on the board may vary due to different batches. Color: Green. Material: PCB + Plastic. Package Contents: 1 x 26P to 34P Converter. 1 x Cable. Only the above package contents, other products are not included. Note: Light reflections and different displays may cause the color of the item in the picture to differ slightly from the actual product. The allowable measurement error is +/- 1-3 cm. [OnBuy.com]