USB to 34Pin 26Pin Floppy Converter Cable

USB to 34Pin 26Pin Floppy Converter Cable Description

The 26P of this adapter card is a 1.0MM pitch drawer-type top connection, and the 34P is a 2.54MM pitch female socket.
This card can be used to convert the 26P 1.0MM interface floppy drive to a 34P ordinary 1.44MB floppy drive or simulated floppy drive. It can be used normally after testing.
Easy data transfer between your computer and floppy
System:support winxp, winme, win7 32bit, win7 64bit, win10

Please Note:
this cable NOT improve the read/write speed of floppy
For 1.44mb Floppy Only.Reliable and efficient
When wiring, connect according to sequence markings of each interface. If the connection is wrong, it not be used.
If the 1# of the 1.0MM FFC/FPC 26P soft cable of the device/computer does not match the 1# of the adapter card, it means that the 26P soft cable is wrong and needs to be replaced. There are two types: the same direction cable and the reverse direction cable.
Regarding whether the soft cable matches, you can compare it with the 26P interface in the picture. The actual picture is a 1.0
MM 26P drawer-type top connection.
The silk screen on the board is different due to different batches
Colour:Green
Material:PCB+Plastic

Package Contents:
2 x 26P to 34P Converter
2 x cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.