Waveshare 10.2inch E-Paper Display (G) E-Ink Display for Raspberry Pi/Jetson /Audio/ESP32 960x640 B

Waveshare 10.2inch E-Paper Display (G) E-Ink Display for Raspberry Pi/Jetson /Audio/ESP32 960x640 B Description

No backlight required, the last screen display can be kept for a long after power failure
The power consumption is very low, basically only consuming power when refreshing
Based FOR Raspberry Pi 40PIN GPIO interface design, suitable for Raspberry Pi series motherboards and Jetson
Reserved SPI control interface, can be connected to for Raspberry Pi / Jetson / for / STM32 and other main control boards
Onboard level conversion chip, compatible with 3.3V and 5V microcontroller interfaces

Specifications
Working voltage:Module version: 3.3V/5V,Bare screen version: 3.3V
Communication interface:3-wire SPI,4-wire SPI
Display color:Red, yellow, black, white
grayscale:2
Overall dimensions (mm):Bare screen size: 224.00 x 157.00 x 1.00,Module size: 65.00 x 30.50
global refresh:27s
display size:215.52 x 143.68 (mm)
point distance:0.2245 x 0.2245 (mm)
resolution:960 x 640 pixels
Refresh power consumption:Less than 100mW
Sleep current:Less than 0.01uA (close to 0)
Viewing angle:Greater than 170
The product appearance and printed words may vary depending the batch, but this does not affect use
Color: As Shown
Material: LCD
B Specifications: With cable

Package Contents:
1 x 10.2inch e-Paper display