Wireless Bluetooth Gamepad, Left Right Game Controller for Nintendo Switch

Wireless Bluetooth Gamepad, Left Right Game Controller for Nintendo Switch Description

Instructions:

Wired Connection:

Game Console On any interface, insert the left and right handle rails accordingly into the left and right sliding grooves of the game console to achieve a wired connection with the game console.

Bluetooth Connection:

(1) Open the Switch game console, click the settings menu button on the main page interface, click the System Settings option to enter the following options menu, then

(2) Click the Airplane Mode option, and then click Controller Connection (Bluetooth) to turn on its Bluetooth function.

(3) Press and hold the PAIR button for 3 seconds to start and enter pairing. LEDs 1-4 flash like a traffic light. Open the host's home screen and click the Controllers menu. Then click Change Handle/Control. The host will automatically search for pairing handles. The hosts are automatically paired successfully, and the hosts' corresponding channel lights are always on. After connecting, click the A button, then select Close to exit the main interface, and you can play the game. After 60 seconds, the handset failed to pair and shut down. (The host has 4 channels in total) 3 connections:

(1) When the handle is paired with the same host once and the host's Bluetooth is turned on, short press any key to wake up the handle and enter the reconnection mode (except L3, R3, PAIR), LED1-4 flashes like a traffic light, about a few seconds. After two seconds, the controller and the host are automatically paired. successfully. The host can start the game operation once the corresponding channel light is always on.

(2) When the handle is in wired mode, remove the handle, the handle will automatically reconnect to the host, and the host will send the corresponding channel to the handle so that the player can perform game operations.

4. Button Composition

(1) Left handle: UP, DOWN, LEFT, RIGHT, L1, L2, L3, -, SL, SR, PAIR, screenshot and 1 analog 3D joystick.

(2) Right handle: A, B, X, Y, R1, R2, R3, +, HOME, SL, SR, PAIR and one analog 3D joystick.

5. Charging

(1) When the handle is off, when the handle's Type-C connector is inserted into the adapter, LEDs 1-4 will flash slowly at 2 Hz. When fully charged, LEDs 1-4 will always be on. After removing the adapter, the LED will be off.

(2) When the controller is online or in the status, when the controller's Type-C interface is inserted into the adapter, the host interface will be displayed in the charging state. (When the controller is in handheld mode, the controller's Type-C interface cannot be charged! Avoid damaging the host)

(3) The left and right handles can be inserted into the slide grooves on both sides of the SWITCH main unit, and the main unit can be charged while charging the main unit via the main unit's charging fire cow. (When there is no fire cow charging, when the host power is over 50%, the host will charge the handle with low power)

Package Included:

1 x Left Gamepad

1 x Right Gamepad

1 x Charging Cable