14Pcs Auto Terminals Removal Key Tool Set(Silver) with Car Sparking Plug Tester in Auto Diagnostic Tool

Descrizione di 14Pcs Auto Terminals Removal Key Tool Set(Silver) with Car Sparking Plug Tester in Auto Diagnostic Tool

2 set Auto parts:1 x tester & 1 set Pin Extractor
It can remove a wire intact from a donor harness and add a new wire - very easily. so you can maintain the factory original harness and plug in your own electronic device without any damage.14 pcs is suitable for most connector terminal, it can be used for almost all brands of cars and other electronic devices.
No need to pry open the terminals, just push and pull the terminal pins. It provide extra leverage, you can easily take out the wire. Made of stainless steel + plastic. It is flexible resilient and durable. If necessary, you can manually change the width of the pin, and it can be restore the original shape without be damaged.
Quickly diagnose problems with all ignition systems,Connect the tool between the and the plug wire.Normal sparks of fire gauges as" and 2cm straight ,"if the ignition coil is bad when the color is red or curve
Use this ignition spark tester to check the condition of the ignition system at each cylinder without going to expensive mechanics.The spark tester connects between the and wire in seconds to troubleshoot dirty connections,defective points and bad cables or connections.Connects in seconds.

Color: black + silver
Material: stainless steel + plastic
Full length 56mm,rod length 34mm
Size:Jumping distance is about 0.8-1.5cm

Package Contents:
1 x tester
5 x Single Pin Extractor
6 x Double Pin Extractor
3 x Casing Tool