2 Pcs Signal Generator Kit, Xr2206 Precise Function Signal Generator Frequency Module Signal Genera

Descrizione di 2 Pcs Signal Generator Kit, Xr2206 Precise Function Signal Generator Frequency Module Signal Genera

Good precision: the XR2206 function signal generator is precise, with a transparent case box shell for good assemble; Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHzParameters: Voltage Supply: 9-12V DC Input; Waveforms: Square, Sine, Triple-cornered ; Impedance: 600 Ohm + 10%; Frequency: 1Hz-1MHz; Amplitude: 0-3V at 9V DC; InputDistortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kaHzSine wave parameters:Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHzSquare wave parameters: Amplitude: 8V (no load) at 9V DC Input; Rise Time: less than 50ns (at 1KHz); Fall Time: less than 30ns (at 1KHz); Symmetry: less than 5% (at 1KHz)Triple-cornered wave: Amplitude: 0-3V at 9V DC input; Linearity: less than 1% (up to 100 KHz) 10 mA1. The welding installation considerations, follow these steps:2. The components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.3. Welding IC socket, terminal blocks, finally socket, adjustable potentiometer.Insert the supply, supply for 5.5 x 2.1 port, inside and outside is negative polarity; Fitting for 9-12 v supply voltage, and the waveform may not be stable for more than 12V.Debugging steps:1. After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip 2. Check IC for errors, if any, please correct in time.size: 12 x 8 x 2 cmMaterial:ABScolour:As shownPackage Contents:2 x Signal Generator KitOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.