DC378V 150MHz 120W EMP Generator Electromagnetic Pulse Transmitter Single Frequency High Electromagnetic Frequency ABS Housing 2025

Descrizione di DC378V 150MHz 120W EMP Generator Electromagnetic Pulse Transmitter Single Frequency High Electromagnetic Frequency ABS Housing 2025

DC378V 150MHz 120W EMP Generator Electromagnetic Pulse Transmitter Single Frequency High Electromagnetic Frequency ABS Housing Features: *Made of high-quality materials, *High electromagnetic frequency: The electromagnetic frequency of the generator is 150MHz, and high-efficiency light bulbs can be lit without power supply. * ABS housing: The ABS shell of the pulse generator has excellent flame retardant and insulation, so you don't have to worry about safety. *Easy charging: 3 holes are charged separately, and each hole takes about 30 minutes to charge. When the indicator of the charger is turned off, it means it is fully charged. *Easy to operate: When the instrument is close to the light-emitting tube part of the lamp, the light will turn on, indicating that the instrument is good and relevant tests can be carried out. *Wide range of uses: High-frequency strong magnetic generators can be used in electronic factories, laboratories, electronic research and development and other factories to test the anti-interference test of electronic motherboard experiments. Specifications: Project Type: Electromagnetic Pulse Generator (single frequency) Material: ABS Frequency: 150MHz Operating voltage: DC37.8V Operating current: 6A Operating power: 120W Antenna mode: Built-in reinforced antenna and external high-frequency antenna Power adapter output voltage: DC37.8V Power adapter input voltage: 110-240VAC Battery: 306090 1 x 3.7V 2250mAh lithium battery (built-in) Size: 85X50X21mm Package Included: 1*Pulse generator 1*Power adapter 1*black coil 1*copper color coil 1*spare transistor Precautions 1. The instrument must be charged with a dedicated charger. 2. Do not touch the metal transmitter during . You may burn your hands. 3. The charging time of the instrument is about 15 minutes each time. 4. Continue for about 5 seconds. It is recommended to pause for 1-2 seconds to allow the chip to cool down and maintain normal use. Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. _x000D_ _x000D_ Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-Minnanxin