Solder wick, 2.5/3.0mm in length, 1.5m copper, reusable and high-temperature resistant

Descrizione di Solder wick, 2.5/3.0mm in length, 1.5m copper, reusable and high-temperature resistant

1. **Introduction to Solder Wick** - A solder wick is a woven metal ribbon that can absorb solder through capillary action. During desoldering, it is used to suck up excess solder. It has good thermal conductivity and tin - carrying capacity and can cleanly absorb solder. 2. **Desoldering and Cleaning Process** - After removing the chip during desoldering, a large amount of solder remains on the circuit board, which affects the re - soldering of the chip. Usually, a solder wick is used for cleaning. 3. **Application Scope** - This solder wick can be used for larger surface - mount components and ordinary aluminum electrolytic capacitors. After use, there is no need for cleaning. Just cut off the part that has absorbed solder after each use and it can be reused. 4. **Portability and Suitability** - The mini size is convenient for carrying and use, making it an essential material for electronic repair and soldering. 5. **Material and Properties** - This roll of solder wick is made of copper and can be freely bent and cut. 6. **Product Sizes** - CP - 2515 blue solder wick size: 2.5 mm - CP - 3015 red solder wick size: 3.0 mm - The length of the copper wire is 1.5 meters. 7. **Other Applications** - It is very suitable for making jewelry components, such as chainmail, bead chains, jump rings, etc. 8. **Product Details** - **Product Name**: Solder Wick - **Material**: Copper - **Features**: High - temperature resistant, high hardness, corrosion - resistant - **Size Details**: - **Size**: 4.6 cm 1.15 cm (about 1.81 inches 0.45 inches) - **Length**: 1.5 meters (about 59.06 inches) 9. **Precautions** - Due to differences in light and screen settings, the color of the product may vary slightly from the picture. - Due to different manual measurement methods, slight size differences are allowed. - To prevent burns, do not directly touch the solder wick during use. Hold the outer shell or use tools such as tweezers to hold it. 10. **Package Contents** - 1 piece of solder wick