Waveshare Modbus CAN FD to Serial Protocol RS232/RS485 Converter Bidirectional RS232/RS485 to CAN FD 5 Modes

Descrizione di Waveshare Modbus CAN FD to Serial Protocol RS232/RS485 Converter Bidirectional RS232/RS485 to CAN FD 5 Modes

The CAN FD to RS232/RS485 converter is a DIN-rail-mounted bidirectional converter between CAN FD and RS232/RS485. It offers high speed, low latency, stable performance, ease of use, and excellent cost-effectiveness
It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom header and trailer. It enables interconnection between CAN and serial devices and is compatible with CAN FD and CAN 2.0A/2.0B protocols
The device supports PC software configuration, comes with a built-in 1202 bus resistor (DIP for quick access), supports DIN rail installation, and is easy to configure and efficient to install
3 filtering methods, 32 hardware filters It can be set to receive only extended frames, only standard frames, or custom frame IDs. It can be set to receive to 32 groups of CAN IDs to avoid interference from large amounts of data

Working voltage: 9V-36V, 12V 1A recommended
Installation method:Guide rail installation
Reload button:Guide rail installation
indicator light:POWER, WORK,COM CAN
CAN port specifications:1 CAN port, supports CANFD, compatible with CAN 2.0A/2.0B
CAN port baud rate:Arbitration domain baud rate: 5Kbps - 1Mbps;Data domain baud rate: 100Kbps - 5Mbps
Terminating resistor:Built-in 2 1200 terminal resistors,Turn any one of the DIP switches to and connect a 1200 resistor in parallel. Turn both switches to and connect two 1200 resistors in parallel
Serial port specifications:Support one RS485 or RS232 access
conversion mode:Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion and custom frame header and frame footer conversion
Color:As Shown
Material:plastic

Package Contents:
1 * CAN FD protocol converter