Proxmark3 Develop Suit Kits 3.0 Proxmark NFC PM3 RFID Reader Writer

Proxmark3 Develop Suit Kits 3.0 Proxmark NFC PM3 RFID Reader Writer Beschrijving

Proxmark3 Develop Suit Kits 3.0 Proxmark NFC PM3 RFID Reader Writer Description
1. Built-in high-frequency antenna, matching antenna depth, eliminating blind spots, reading the entire data card without interruption. Increase the frequency of the key, the size of the card can accommodate everything. Data analysis, completely stable, and low error rate.The low frequency antenna improves the signal-to-noise ratio, the recognition speed is higher, and the mobile design can meet needs.
2. No antenna interface, no need to connect because it is easily damaged. Cancel lithium battery, easy and convenient. (In offline mode, you can use mobile power). Except that it has to do with the old relay, it has low cost, light weight and easy to carry. Compatible with all official firmware, can clean any version as needed. Depending on your preference, you can use the official " line" or "Proxmark Tool.exe" to work
3. DOUBLE port usb. From AT91SAM7S256 to AT91SAM7S512. (Low-frequency antenna is installed on the right) Antenna #LF: 30.41 V @ 125.00 kHz; Antenna #LF: 22.01 V @ 134.00 kHz; #HF antenna: 28.43 V @ 13.56 MHz; (Low-frequency antenna is installed on the left) Working voltage:3.5-5.5V, Current work: 50-130mA
4. NOTE:The phone stickers and glue cards in the product pictures are sent randomly without remarks. The new machine shows v3, which is a printing problem. You can directly flash the v5 firmware without affecting the use. Please note.
Card operation mode:
1. Ordinary M1 S50 card reader and other Type B 14443A cards
2. Analyze PRNG 0 using department-specific security
3. Use embedded (mfoc) security to solve the entire map
Analog card mode:
1. the user ID of IC S50/Ultralight/DESFire series cards
2.Analog data M1 S50 for the entire sector.(Select card reader)
3. the shell M1 S50 and obtain the data used to calculate the key(select card reader)
Silentmode:
1. A quiet data transmission analyzer between the M1 S50 card and the card reader,analyzing the key
2. 14443A Class B silent card reader with full communication function
The reader is used for debugging and analyzing actions
Low frequency:
Card operation mode:
1.Read ID,HID,T55XX,Indala and other low frequency cards
2.Use T55XX ID/HID/Indala recording card to turn it into three cards
Analog card mode:
1.Enter the ID/HID card,which is an analog of the specified card type
2.Analog modulation scheme,indicated data card and ASK//
Silent mode:
1.Quietly sniff data between card and reader(less,untested)
Colour:Black
Material:PC+Metal
Size:Length and width:54x86.6mm, Thickness:6.2mm(thinnest)9.8 mm(with screws)15.8mm(with low frequency antenna)
Package Contents:
1 * Proxmark3
1 * T5577 card
1 * uid card
1 * s50 card
1 * Cuid card
1 * s50 deduction
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.