U100K 3.5In 1.44MB 1000 Floppy Disk Drive to USB Emulator

U100K 3.5In 1.44MB 1000 Floppy Disk Drive to USB Emulator Beschrijving

U100K 3.5In 1.44MB 1000 Floppy Disk Drive to USB Emulator Description
Use A Normal USB Flash Drive As The Medium For The Transfer Design.
34pin Floppy Drive Interface, 5V DC Power Supply, Easy To Install.
1000 Partitions From A USB Flash Drive Can Be Used.Built-In Self-Formatting.
Floppy Drive With 34pin Connector And 5v Dc Power Plug.Use A 2hd Floppy Disk With A Capacity Of 1.44mb.
Disk Format:Number Of Cylinders:80, Tracks:160 Sectors/Tracks
18 Bytes/Sector:512 Data
Transfer Rate:500 Kbps
Encoding Method:MFM
Control Board:
8 Segment Number:Represents The Partition Number
Green Led:Read And Write Operation Status
Usb Port:Connect A USB Flash Drive
Button:
The Left Button Is Used To Go Up Ten Digits, The Right Button Is Used To Go Up Ten Digits, And Pressing The 2 Buttons At The Same Time Is Ok
Rise To 100 Places
Format The Usb Flash Drive.
1. Format Usb Flash Drive As 1000 Partitions With The Built-In Self-Formatting Feature
2. Install The Emulator On Your Computer And Format Each Partition By Operating Driver A.
3. Using The Emulator Ufa1m44-100, Insert The Usb Flash Drive Into It,
Connect To The Computer, For Xp/2000/7, It Be Recognized As Removabe Driver A Or B, Formatting Each Partition.
The Ufa1m44-100 Also Has Built-In Self-Formatting.
Read And Write Data.
1. Install The Emulator On Your Machine
2. Install The Emulator On Your Computer
3. Connect A USB Flash Drive On Your Computer To Read And Write Data Directories Through Software, For XP/2000
4. Using The Emulator Ufa1m44-100, Insert It Into A Usb Flash Drive, Connect It To A Computer, Read And Write Data Under Xp/2000/7.
Need Attention: Are Not Supported
Colour:Black
Material:ABS
Package Contents:
1 * Host
1 * CD
2 * Jump Cap
4 * Screw
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.