Compatible With Cardin S449 Qz1 Qz2 Qz3 Rolling Code Garage Door Key Remote Control Transmitter Access Opener_Surprise Gift

Descrição de Compatible With Cardin S449 Qz1 Qz2 Qz3 Rolling Code Garage Door Key Remote Control Transmitter Access Opener_Surprise Gift

1. Programming type: Programming with the receiver

2. Number of channels: 2

3. Code: rolling code

4. Frequency: 433.92 MHz

5. Operating range: 10-50 m (open space)

Remote control comes with battery included!!!

Safety of use: dynamic code offers a high level of security, non-copyable code.

Disclaimer: Your old remote control must be the same as the one in the advertisement. The remote control is not compatible with other remote controls.

Programming the transmitter on the receiver

The remote control has the same functions as your old remote control. This must be programmed with the original receiver according to the original manual you received upon delivery.

1. Locate the 'Learn' / 'Code Set' button on the motor.

This is usually located under the lamp cover or on the back of the motor.

2. Press the 'Learn/Code Set' button once and then release it. A light should illuminate.

3. Press the desired button on the remote control once and the light will turn off.

4. Press the remote control again. The light on the motor flashes and then goes out, indicating that the remote control is coded.

5. Test the operation of the remote control.

Color: As shown

Material: Plastic

Package contents:

2 * Remote control

Only the above package contents, other products are not included.

Note: Light reflection and different monitors may cause the color of the item in the image to differ slightly from the actual color. The allowed measurement error is +/- 1-3 cm.