INF Universal code cloner / garage door remote control 433 MHz 2-pack_Surprise Gift

Descrição de INF Universal code cloner / garage door remote control 433 MHz 2-pack_Surprise Gift

Code cloner for an extra spare remote control: RF code cloner in remote control design to clone over your old remote control codes. Perfect for transferring/copying the code for garage doors, automatic gates, security systems and household appliances.

Always a backup copy at hand: Copy the functions from your original remote control with this 4-channel RF duplicator with learning functions, so you always have a backup or extra garage door opener at hand.

Perfect for the garage door: Compatible with the fixed frequency of 433 MHz, which is the frequency that the vast majority of garage door openers use. Compatible with the following chipsets: 2260 (all manufacturers) 2262 (all manufacturers) PT2264, 5326 (all manufacturers) SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers)1527 (all manufacturers) 2240 (all manufacturers) HCS101, HCS200 \ HCS201 (parts of the code) HCS300 \ HCS301 (parts of the code) Parts of single chip.

NOTE: This model is not suitable for rolling code. In that case, you should get another model. Cannot copy the car alarm box (for safety reasons).

Specification:

Signal transmission speed: 50-60 KHz Voltage: 12 V Current: 10 mA Frequency: 433 MHz Signal transmission power: 10-12 mW Signal transmission distance: Up to 50 m in open space Color: Black/silver Battery: 2V27A battery (included) Size: 6x4x1.2 cm Weight: 28 g

Package includes:

Universal code cloner - remote control

How to copy:

Step 1: Remove the old code from the duplicator

1. Continuously press buttons A and B until the LED flashes

2. Release button B (keep pressing button A) and slowly press button B 3 times, LED flashes

3. Release button A, code deletion is complete

Step 2: Copy code from original transmitter

1. Place the duplicator as close to the original transmitter as possible.

2. Press and hold button A on the original transmitter, press and hold button A on the duplicator, until you see the duplicator's LED flashing.

3. Release both buttons, finish code copying. Copy the next button in the same way.

Reset function:

Hold buttons C and D for 3 seconds, LED flashes, all buttons return to the last copied codes.

• RF code cloner in compact remote control design
• Copies the code for garage doors, gates, etc.
• Compatible with fixed frequency of 433 MHz
• Signal transmission of up to 50 m