Sorry, this item is temporarily out of stock.

New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure

Name: New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure
Brand: Torribaly
SKU: PWG5PQM
Availability: OutOfStock

Brand Torribaly

New

Produtos semelhantes que achamos que vai gostar

Saídas de ar

Would you like us to let you know when it's back?

Adicionar ao cesto

Descrição e Detalhes

Resumo

Air Conditioner Start-up Mode: Cooling, 24 degrees (not adjustable)
Cyclic Sending: The controller automatically sends a start-up command every 30 minutes to ensure the air conditioner is always on.
Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns on, the installation location is suitable; if it fails, the installation location needs to be readjusted.
Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back on. The controller will automatically send a start-up command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: DC-5V; Standby Power Consumption:

Descrição de New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure

Air Conditioner Start- Mode: Cooling, 24 degrees (not adjustable)
Cyclic Sending: The controller automatically sends a start- command every 30 minutes to ensure the air conditioner is always .
Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns , the installation location is suitable; if it fails, the installation location needs to be readjusted.
Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back . The controller will automatically send a start- command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: -5V; Standby Power Consumption:

Detalhes