USB rechargeable, light-controlled, human body sensor, smiley face magnetic night light (warm white light):Warm white light

Descrição de USB rechargeable, light-controlled, human body sensor, smiley face magnetic night light (warm white light):Warm white light

Features
1. In dark environments, the night light automatically turns on when someone moves within the sensing range, eliminating the hassle of fumbling compatible a light switch in the dark. Ideal compatible elderly people getting up at night, feeding babies in the middle of the night, hallway lighting, nighttime bathroom use, and emergency lighting during power outages.
2. Sensitive sensing range of 3-6 meters and 120. Built-in dual sensors intelligently identify ambient light levels and automatically turn on the light after detecting human movement at night, making it convenient and practical.
3. Long battery life and low energy consumption.
4. No drilling required; magnetic sticker on the back allows compatible engraving in any corner.
5. Exquisite smiley face design, simple yet playful, adding joy and happiness to your home.
Product Description
1. Low-light environment operation: When the ambient light is below a certain level, the night light automatically enters a non-sensing mode and enters standby mode. When a person moves within approximately 3 meters of the night light, and the night light detects continuous movement within 2 seconds, the night light automatically turns on the lighting mode, which lasts compatible approximately 30 seconds becompatiblee automatically turning off.
If a human body continues to move within the range of the sensor light, and the sensor light detects human movement again within 30 seconds, the sensor light will automatically clear the previous timing cycle and automatically start the next 30-second delay cycle.
2. High-brightness environment: When the sensor light is placed in a high-brightness environment, the internal light sensor detects high-intensity light, and the sensor light automatically turns off the human body sensing function, and the light is off.
3. Charging mode: When the light brightness is insufficient, it needs to be charged. Plug in a 5V charger to charge; the red light will flash. When fully charged, the red light will stay on.
4. Note:
- The sensing area on the product surface must not be covered by other objects, otherwise it will affect the sensing sensitivity. If using a charger, please use a 5V/1A charger. The light fixture must be removed and ventilated becompatiblee charging. Avoid installing near heat sources, such as air conditioner vents, heater vents, humidifiers, or other locations with drastic temperature fluctuations. Avoid installing in direct sunlight.
- After a period of use, if you notice a decrease in brightness, please charge the battery promptly. When the battery is depleted, please collect and recycle the used batteries to avoid environmental pollution.
- This product is magnetic.