2X for Raspberry Pi 2 RP2350B Development Board RP2350-PiZero PSRAM DVI for -Compatible

Samenvatting

• RP2350-PiZero Development Board. Designed based on for Raspberry Pi RP2350. Onboard DVI port, Micro-SD card slot and PIO-USB port. RP2350-PiZero is a high-performance, cost-effective microcontroller designed by Waveshare. It has an onboard DVI interface, Micro-SD card slot and PIO-USB interface, leads out a Raspberry Pi-compatible 40PIN GPIO interface, and reserves a PSRAM interface for easy development and integration into products.
• RP2350B microcontroller chip designed with for Raspberry Pi. Unique dual-core, dual-architecture, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, clock frequency up to 150MHz, allowing users to flexibly switch between the two architectures. Built-in 520KB SRAM and 16MB on-chip Flash, and a PSRAM interface is reserved. Uses Type-C interface, no need to worry about plugging it in the right or wrong direction
• Onboard DVI interface, can drive most HDMI screens (needs compatible DVI interface). Onboard PIO-USB interface, can be used as USB host and slave. Onboard Micro-SD card slot, can read and write Micro-SD card. Onboard lithium battery charging and discharging interface, which is convenient for mobile use. USB1.1 host and slave support
• Supports low power sleep and hibernation modes. Drag-and-drop program downloading via USB recognition as mass storage. Bring out 5 multi-function GPIO pins. 2 SPI, 2 I2C, 2 UART, 2 12-bit ADC, and 16 controllable PWM channels. Precise on-chip clocks and timers. Temperature Sensor. On-chip accelerated floating point library. 12 Programmable I/O (PIO) state machines for custom peripheral support.
• Multiple uses in one: Onboard DVI, PIO-USB and Micro-SD card slots provide you with more possibilities. The picture is for display only, this product does not include 1.3-inch LCD expansion board and 7-inch touch screen. Supports C/C++, MicroPython, for Arduino. Complete SDK and open source tutorials are provided to make it easy to get started and can be quickly embedded into applications