Alcohol Gas Concentration Sensor High Sensitivity Breathalyzer Module Vehicle Detection DIY Projects
Op voorraad
Waarom je van winkelen bij OnBuy zult houden:
- Verdien Cashback bij elke aankoop – gebruik het meteen voor je volgende bestelling
- Gratis levering – op miljoenen artikelen op de hele site
- Klanten vertrouwen ons – 133,000 beoordelingen met de score “Uitstekend”
Prijzen zijn inclusief btw.
Rentevrije betaalopties beschikbaar
Bekijk de volledige productbeschrijving & details
Bezorging: Standaard (€ 4,00) | di. 15de - ma. 21ste sep.
Verkocht door: BALURE
Retourzendingen: 30 dagen
180 dagen betalingsbescherming
Misschien vind je dit ook leuk
Samenvatting
- Alcohol sensor module with a measuring range of 0-5ppm, supporting I2C and UART outputs.
- Fast and accurate detection of alcohol gas concentration in the air, ideal for breathalyzers and smart vehicles.
- Calibrated at the factory based on electrochemistry principles, ensuring reliable performance.
- Wide operating voltage of 3.3~5.5V DC and low power consumption of 0.05W (5V).
- Interfering gases include benzene, toluene, acetic acid, hydrogen sulfide, and carbon monoxide; with a service life of over 2 years in the air.
Alcohol Gas Concentration Sensor High Sensitivity Breathalyzer Module Vehicle Detection DIY Projects Beschrijving
Alcohol sensor module with a measuring range of 0-5ppm, supporting I2C and UART outputs.
Fast and accurate detection of alcohol gas concentration in the air, ideal for breathalyzers and vehicles.
Calibrated at the factory based electrochemistry principles, ensuring reliable performance.
Wide operating voltage of 3.3~5.5V and low power consumption of 0.05W (5V).
Interfering gases include benzene, toluene, acetic acid, hydrogen sulfide, and carbon monoxide; with a service life of over 2 years in the air.
This is an compatible alcohol sensor module aiming at fast and accurate detection of alcohol gas concentration in the air. The sensor is well applicable to the small alcohol concentration measurement in breathalyzers, vehicles, and more. The module supports 0.01ppm (10ppb) resolution and works well with mainstream controllers like , ESP32, and Raspberry Pi.
Connection Diagram
1. Read Sensor Data via I2C
Detected Gas: alcohol
Operating Voltage: 3.3~5.5V
Signal Output: I2C, UART(0~3V)
Measuring Range: 0~5ppm
Resolution: 0.01ppm (10ppb)
Preheat : 3min
Response : 60s
Recover : 60s
Operating Temperature: -20~50
Operating Humidity: 15~90%RH (No condense)
Storage Temperature: 0~25
Board Dimension: 27mmx37mm/1.06x1.46"
Color: As Shown
Material: PCB
Package Contents:
1*alcohol sensor module 1*Gravity-4pin I2C cable 4*nylon posts 8*screws
Details
| OPC | PXDJRQK |
|---|---|
| Merk | Jojomino |
| Codes | 6032498648338 (EAN) |
| Product- en veiligheidsinformatie |
Productgegevens
| Height | 4cm |
|---|---|
| Width | 8cm |
| Length | 12cm |
| Weight | 0.1kg |
| Colour | As Shown |
| Material | PCB |
Vergelijk verkopers voor Alcohol Gas Concentration Sensor High Sensitivity Breathalyzer Module Vehicle Detection DIY Projects
- Nieuw van € 66,17
| Verkoper | Beoordelingen | Garantie | Retourneren | Prijs | Bezorging | Totaal | Aantal |
|---|---|---|---|---|---|---|---|
|
Verzonden vanuit:
|
(352 beoordelingen) | - |
30 dagen
Gratis retourneren Nee
|
€ 62,17
|
+€ 4,00 Delivery
Geschatte bezorging:
15de-21ste sep.
|
€ 66,17
|
Verdien terwijl je shopt met directe Cashback op alles.
Zonder addertjes, zonder kosten
- Uitbetaald op je OnBuy-account
- Besteed het bij je volgende aankoop
- Bewaar het of neem het op
Word een Cashback VIP
Slechts 1 aankoop ontgrendelt grotere deals en betere tarieven