H743-Wing Flight Controller 3-8S LIPO Supports INAV/ Ardupilot Firmware CAN Bus for Fixed Wing and VTOL FPV Drone

H743-Wing Flight Controller 3-8S LIPO Supports INAV/ Ardupilot Firmware CAN Bus for Fixed Wing and VTOL FPV Drone Beschrijving

STM32H743 MCU running at 480 MHz
High-Precision / low-noise ICM-42688-P IMU
CAN Bus Support
Dual Camera Inputs
3 -board BEC output 5V, 6V/8V and 9V/12V

9V/12V /OFF Pit
-board voltage & current sensor
Integrated BMP280 barometer
Plug-and- GPS, CAN, I2C
Small & low-profile design fits into compact frames
Supports INAV (6. 1.1 & later), Ardupilot (4. 4 & later)
MCU: STM32H743, 480 MHz, 1MB RAM, 2MB Flash
IMU: ICM-42688P (SPI3)
Baro: BMP280 (I2C4)
OSD: AT7456E (SPI2)
: MicroSD card slot SDMMC2
7x Uarts (1,2,3,5,6,7,8) with built-in inversion.
14x PWM outputs, 1x CAN, 5x ADC (Bat1/Curr1, Bat2/Curr2 and RSSI)
3x I2C (I2C1 and I2C2 for external devices, I2C4 for onboard sensors)
3x LEDs for FC STATUS (, Red) and 3.3V indicator (Green)
USB/DFU Key Extender with USB Type-C
Dual Camera Inputs
5V/9V(12V) for Camera/VTX power
High-precision Current Sense (90A continuous, 220A )
Battery Voltage Sensor: 5K:25.5K (Scale 1800 in INAV, BATT_VOLT_MULT 18.18 in ArduPilot)
Static power 160mA@5V
(The actual object has words, to avoid risks, the picture has been processed)
Specification:A
Color: As Shown
Material: PCB

Package Contents:
1 * Flight Controller Kti