Obrázky produktu
Omlouváme se, tato položka je dočasně vyprodaná.
18650 Type-C LCD 4/1 Channel Display Battery Capacity Tester MAh Lithium Digital Battery Detection for Battery Testing
Nové
Chcete, abychom vám dali vědět, až bude zpět?
Popis a podrobnosti
Shrnutí
- 4 Channel Display Battery Capacity Tester. The product supports four-channel capacity and internal resistance measurement. Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode. Each channel is independent of each other, set separately, operates independently, and does not interfere with each other
- 18650 battery holder uses compact battery holder, suitable for flat-head battery measurement. Active cooling of fan supports overheating protection. Using DC two-wire method to measure internal resistance
- Note: lithium iron phosphate battery charging is not supported
- Working voltage: DC5V. Applicable battery: suitable for all batteries that meet the requirements of stopping discharge voltage of 2.5~3.5V and starting from 2.8V to 4.2V. Power supply interface: Two-way Type-C power supply interface(Excluding power supply and power cord). System language: English/Chinese can be switched
- Test quantity: 4-way charging and discharging measurement. Internal resistance measurement: support, use DC two-wire method to test internal resistance. Charging function: support, automatic cut-off charging when fully charged (lithium iron phosphate battery charging is not supported)
18650 Type-C LCD 4/1 Channel Display Battery Capacity Tester MAh Lithium Digital Battery Detection for Battery Testing Popis
4 Channel Display Battery Capacity Tester. The product supports four-channel capacity and internal resistance measurement. Support separate charging and discharging, and support to 9 charging and discharging cycles in automatic mode. Each channel is independent of each other, set separately, operates independently, and does not interfere with each other
18650 battery holder uses compact battery holder, suitable for flat- battery measurement. Active cooling of fan supports overheating protection. Using two-wire method to measure internal resistance
Note: lithium iron phosphate battery charging is not supported
Working voltage: DC5V. Applicable battery: suitable for all batteries that meet the requirements of stopping discharge voltage of 2.5~3.5V and starting from 2.8V to 4.2V. Power supply interface: Two-way Type-C power supply interface(Excluding power supply and power cord). System language: English/Chinese can be switched
Test quantity: 4-way charging and discharging measurement. Internal resistance measurement: support, use two-wire method to test internal resistance. Charging function: support, automatic cut-off charging when fully charged (lithium iron phosphate battery charging is not supported)
Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable
Automatic charging and discharging: supported. The battery is fully charged at the end of automatic mode
Cyclic charging and discharging: supported, 1~9 cycles adjustable (only supported in automatic mode)
Status prompt: Supported
Cooling mode: fan active cooling
Overheat protection: support
Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable gears
Discharge current: the maximum current is about 1A, which is not adjustable, an
Podrobnosti
| OPC | PXXMYGD |
|---|---|
| Kódy | 4712234476068 (EAN) |
| Informace o produktu a bezpečnosti |
Produktová data
| Height | 5cm |
|---|---|
| Width | 11cm |
| Length | 19cm |
| Weight | 0.2085kg |
| Colour | Green |
| Material | Plastic |