Obrázky produktu
Sorry, this item is temporarily out of stock.
3X High and Low Liquid Level Intelligent Controller with 2Non-Contact Sensor Module Automatic Control Liquid Water Level
New
Podobné produkty, které by se vám mohly líbit
Would you like us to let you know when it's back?
Popis a podrobnosti
Shrnutí
- Strong compatibility, can be used in conjunction with a variety of liquid level sensor.Strong protection, with waterproof pump idling protection and water level overflow detection output, with 4 hours overtime pumping alarm.
- Relay dry node output, can be applied to a variety of load control. Control of diversification, manual or automatic mode control of water pump.
- The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed.
- Water level automatic control: water level is lower than the low position induction probe, automatically start the pump, the water level rises to high level, and automatically closes the pump.
- Idling delay pump: after starting, if the water supply pipe is detected without water, then delay 3-5 minutes to close the pump. During the pumping process, if the water flow stopped for more than 3 seconds, the pump was closed immediately.
3X High and Low Liquid Level Intelligent Controller with 2Non-Contact Sensor Module Automatic Control Liquid Water Level Popis
Strong compatibility, can be used in conjunction with a variety of liquid level sensor.Strong protection, with waterproof pump idling protection and water level overflow detection output, with 4 hours overtime pumping alarm.
Relay dry node output, can be applied to a variety of load control. Control of diversification, manual or automatic mode control of water pump.
The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed.
Water level automatic control: water level is lower than the low position induction probe, automatically start the pump, the water level rises to high level, and automatically closes the pump.
Idling delay pump: after starting, if the water supply pipe is detected without water, then delay 3-5 minutes to close the pump. During the pumping process, if the water flow stopped for more than 3 seconds, the pump was closed immediately.
Automatic tracking water source: after idling pump stop, start pumping once every two hours, until the water is full, pump stops.
Manual automatic switching: press K1 button to mode of work, red light to automatic mode, kill mode is manual mode.
Non contact inductive probe: durable probe, strong anti-interference ability, sensitive induction, no contact with liquid, corrosion resistance, safety, environmental protection and no pollution.
Application: Suitable for controlling radiotube, water pumps, etc, as it can achieve the automatic control of high and low water level as well as keep level stable.
Type: Liquid Level Controller
Input Voltage: AV100V-220V,50/60Hz
Operating Voltage: DC12V
Operating Current:
Working current less than =110mA,
Static consumption current less than =20mA
Load Power: less than 1.6KW(Installation of AC contactor is needed for overloadi
Podrobnosti
| OPC | PTHQW89 |
|---|---|
| Kódy | 6032562168342 (EAN) |
| Informace o produktu a bezpečnosti |
Produktová data
| Height | 15cm |
|---|---|
| Width | 11cm |
| Length | 18cm |
| Weight | 0.801kg |
| Colour | White |
| Material | ABS |
Would you like us to let you know when it's back?
3X High and Low Liquid Level Intelligent Controller with 2Non-Contact Sensor Module Automatic Control Liquid Water Level
New
Mohlo by se vám také líbit