Sorry, this item is temporarily out of stock.

4 Set ESP32-S3 Development Board ESP32 SuperMini Development Board ESP32 Development Board WiFi ,DIY Accessories

New

Podobné produkty, které by se vám mohly líbit

Počítačové procesory

Would you like us to let you know when it's back?

Přidat do košíku

Popis a podrobnosti

Shrnutí

Powerful CPU: ESP32-S3, 32-bit RISC-V single-core processor running at 160 MHz. WiFi: 802.11b/g/n protocol, 2.4GhHz, supports Station mode, SoftAP mode, SoftAP+Station mode, and mixed mode. Bluetooth: Bluetooth 5.0
Ultra-low power consumption: deep sleep power consumption of about 43μA;Rich board resources: 400KB SRAM, 384KB ROM 4Mflash built-in.Chip Model : ESP32S3FH4R2;Ultra-small size: as small as a thumb (22.52x18mm) Classic form factor for wearables and small projects.
Reliable security features: cryptographic hardware accelerator with support for AES-128/256, hash, RSA, HMAC, digital signature and secure boot;Rich interfaces: 1xI2C, 1xSPI, 2xUART, 11xGPIO(PWM), 4xADC;On-board RGB, Blue LEDs: Public GPIO48 pins;
External power supply:If you need external power supply just connect the external power supply + level to the position of B+ on the back of the board, and the negative terminal to B- on the back. (Support 3.3~6V power supply). You can charge the battery by connecting to USB.
Enter download mode: Way 1: Press and hold BOOT to power up. Way 2: Press and hold the BOOT button of ESP32S3, then press the RESET button, release the RESET button, then release the BOOT button, at this time ESP32S3 will enter the download mode.

4 Set ESP32-S3 Development Board ESP32 SuperMini Development Board ESP32 Development Board WiFi ,DIY Accessories Popis

Powerful CPU: ESP32-S3, 32-bit RISC-V single-core processor running at 160 MHz. WiFi: 802.11b/g/n protocol, 2.4GhHz, supports Station mode, SoftAP mode, SoftAP+Station mode, and mixed mode. : 5.0
Ultra-low power consumption: deep sleep power consumption of about 43μA;Rich board resources: 400KB , 384KB ROM 4Mflash built-in.Chip Model : ESP32S3FH4R2;Ultra-small size: as small as a thumb (22.52x18mm) Classic form factor for wearables and small projects.
Reliable security features: cryptographic hardware accelerator with support for AES-128/256, hash, RSA, HMAC, digital signature and secure boot;Rich interfaces: 1xI2C, 1xSPI, 2xUART, 11xGPIO(PWM), 4xADC;-board RGB, LEDs: Public GPIO48 pins;
External power supply:If you need external power supply just connect the external power supply + level to the position of B+ the back of the board, and the negative terminal to B- the back. (Support 3.3~6V power supply). You can charge the battery by connecting to USB.
Enter download mode: Way 1: Press and hold BOOT to . Way 2: Press and hold the BOOT button of ESP32S3, then press the RESET button, release the RESET button, then release the BOOT button, at this ESP32S3 will enter the download mode.

Color: As Shown
Material: plastic

Package Contents:
4 set ESP32-S3 Development Board

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Podrobnosti