5Pcs AD9833 Programmable Microprocessors Serial Interface Sine Square Wave DDS, Signal Generator Module

5Pcs AD9833 Programmable Microprocessors Serial Interface Sine Square Wave DDS, Signal Generator Module Popis

[AD9833] The AD9833 is a low power, programmable waveform generator capable of producing sine, triangular, and square wave outputs. Waveform generation is required in various types of sensing, actuation, and domain reflectometry (TDR) applications.
[Compact design] The output frequency and phase are software programmable, allowing easy tuning. No external components are needed. The frequency registers are 28 bits wide: with a 25 MHz clock rate, resolution of 0.1 Hz can be achieved; with a 1 MHz clock rate, the AD9833 can be tuned to 0.004 Hz resolution.
[High performance] The AD9833 has a standard serial interface that allows the part to interface directly with several microprocessors. The device uses an external serial clock to write the data or control information into the device.
[Applications] The AD9833WBRMZ-REEL model is available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that this automotive model may have specifications that differ from the commercial models; therefore, designers should review the Specifications section of this data sheet carefully.

Colour:
Material:PCB

Package Contents:
5 * AD9833 Sine Square Wave DDS Signal Generator
5 * Pin