8CH 433M Bidirectional IO Controller Point-to-Point Feedback Remote Controller Relay Swicth Module for Garage Security

8CH 433M Bidirectional IO Controller Point-to-Point Feedback Remote Controller Relay Swicth Module for Garage Security Popis

This is a wireless remote control with feedback function, no configuration required, as long as the transceiver ''Frequency and ID'' settings are consistent, it can be controlled. With feedback function, the LED indicator the transmitter will indicate the status of the receiver.
Application: Home; Home Automation; Identification system; Remote Motor Control System; CCTV Camera PTZ Control; Security system; LED dot matrix screen; Ship remote control system; Farm remote gate control system
NOTE: To install the antenna, remove the top cover of the housing.
NOTE: When using two transmitting devices at the same , the frequency or ID number cannot be the same
NOTE: When using two receiving devices at the same , the frequency or ID number cannot be the same

Transmitter :
1 Working voltage: 12V (8-30V)
2 Working current: 12-30MA
3 Input channels: 8 channels, low pulse trigger (NPN)
4 Transmit power: 22dBm
5 Working frequency band: 425~455MHz (can be set by DIP )
6 The farthest transmission distance in the open field: 2 kilometers

Receiver:
1 Working voltage: 12V (11-15V)
2 Working current: 12-260MA
3 Output channels: 8 channels 10A relay output
4 Working frequency band: 425~455MHz (can be set by DIP )
6 The farthest transmission distance in the open field: 2 kilometers
6 Working mode: Momentary(Jog),Self-locking,Interlock, Delay (can be set by DIP )
7 Maximum load: 10A/250VAC, 10A/125VAC, 10A/30VDC, 10A/28VDC, 10A/12VDC

The first use process:
1 Confirm that the frequency and ID of the receiver and transmitter are the same
2 Power the receiver first, the PWR light is
3 Power the transmitter again, the PWR light flashes, and the PWR light the receiver flashes at the same , indi