Tržiště s Cashback Okamžitý výdělek na všechno Doprava zdarma na milionech produktů Vysoce hodnocené Vynikající hodnocení na Trustpilotu Staňte se VIP členem Cashback Vyšší sazby, lepší nabídky 30denní možnost vrácení zboží Plus ochrana nákupu

Omlouváme se, tato položka je dočasně vyprodaná.

8X ESP32 C3 Development Board Modules Wifi BT Module RISC-V 32-Bit Single-Core Processor

Nové

Podobné produkty, které by se vám mohly líbit

Karty síťového rozhraní

Chcete, abychom vám dali vědět, až bude zpět?

Přidat do košíku

Popis a podrobnosti

Shrnutí

ESP32C3SuperMini is an IoT mini development board based on the EspressifESP32-C3 WiFi/Bluetooth dual-mode chip. ESP32-C3 is a 32-bit RISC-VCPU, including FPU (Floating Point Unit), which can perform 32-bit single-precision operations: it has powerful computing capabilities.
It has excellent RF performance supporting IEEE 802.11 b/g/n WiFi and Bluetooth 5 (LE) protocols. The board comes with an external antenna to enhance signal strength for wireless applications.
It also features a small, sophisticated form factor combined with a single-sided surface mount design.
It is equipped with rich interfaces, with 11 digital I/0s that can be used as PWM pins and 4 analog 1/0s that can be used as ADC pins. It supports four serial interfaces including UART, 12C and SPI. There's also a small reset button and a bootloader mode button on the board.
Powerful CPU: ESP32-C3, 32-bit RISC-V single-core processor running at up to 160MHz

8X ESP32 C3 Development Board Modules Wifi BT Module RISC-V 32-Bit Single-Core Processor Popis

ESP32C3SuperMini is an IoT development board based the EspressifESP32-C3 WiFi/ dual-mode chip. ESP32-C3 is a 32-bit RISC-VCPU, including FPU (Floating Point Unit), which can perform 32-bit single-precision operations: it has powerful computing capabilities.
It has excellent RF performance supporting IEEE 802.11 b/g/n WiFi and 5 (LE) protocols. The board comes with an external antenna to enhance signal strength for wireless applications.
It also features a small, sophisticated form factor combined with a single-sided surface mount design.
It is equipped with rich interfaces, with 11 digital I/0s that can be used as PWM pins and 4 analog 1/0s that can be used as ADC pins. It supports four serial interfaces including UART, 12C and SPI. There's also a small reset button and a bootloader mode button the board.
Powerful CPU: ESP32-C3, 32-bit RISC-V single-core processor running at to 160MHz

WiFi: 802.11b/g/n protocol, 2.4GhHz
: 5.0
Ultra-low power consumption: Deep sleep power consumption is about 43μA
Rich board resources: 400KBSRAM, 384KBROM
Built-in 4Mflash
Chip model: ESP32C3FN4
Classic extra small size: as small as thumb
Form factor for wearables and small projects
Rich interfaces: 1x12C, 1xSPI, 2xUART, 11xGPI0(PWM), 4xADC
Single-sided component, surface mount design
Onboard LED light: GPI08 pin
Colour:As Shown
Material:plastic

Package Contents:
8 x ESP32-C3 development board(pin header not soldered)