Tržiště s Cashback Okamžitý výdělek na všechno Doprava zdarma na milionech produktů Vysoce hodnocené Vynikající hodnocení na Trustpilotu Staňte se VIP členem Cashback Vyšší sazby, lepší nabídky 30denní možnost vrácení zboží Plus ochrana nákupu

Omlouváme se, tato položka je dočasně vyprodaná.

Capsule V1.1 Embedded IoT Development Board, Upgrade of Capsule, Stamp-S3A Main Controller BMI270 IMU SPM1423 Mic

Nové

1 292,96 Kč

Podobné produkty, které by se vám mohly líbit

Základní desky

Chcete, abychom vám dali vědět, až bude zpět?

Přidat do košíku

Popis a podrobnosti

Shrnutí

Capsule v1.1 is an iterative upgrade of Capsule, with the core upgrade being the replacement of the main controller from Stamp-S3 to Stamp-S3A, further optimizing hardware performance and user experience. Capsule v1.1 integrates sensing acquisition, power supply, data storage, and main controller drive into one unified function.
It features a high-performance BMI270 IMU inertial measurement unit for precise motion trajectory tracking and attitude control. It incorporates an SPM1423 microphone supporting audio recording, voice recognition, and voice wake-up functions, and includes an infrared sensor for remote control operation.
The power configuration includes a built-in 250mAh battery and supports external expansion batteries to ensure stable long-term operation. It has an onboard TF card slot for flexible storage expansion, meeting data logging and media file storage needs.
Equipped with an RTC8563 real-time clock module, it provides accurate time and date information and supports timed wake-up, effectively achieving low-power operation.
The device integrates a buzzer for sound prompts and status feedback, and has a reserved Proto pin header expansion interface for freely connecting various custom sensors and expansion boards, suitable for diverse project development needs.

Capsule V1.1 Embedded IoT Development Board, Upgrade of Capsule, Stamp-S3A Main Controller BMI270 IMU SPM1423 Mic Popis

Capsule v1.1 is an iterative upgrade of Capsule, with the core upgrade being the replacement of the main controller from Stamp-S3 to Stamp-S3A, further optimizing hardware performance and user experience. Capsule v1.1 integrates sensing acquisition, power supply, data storage, and main controller drive into one unified function.
It features a high-performance BMI270 IMU inertial measurement unit for precise motion trajectory tracking and attitude control. It incorporates an SPM1423 microphone supporting audio recording, voice recognition, and voice wake- functions, and includes an infrared sensor for remote control operation.
The power configuration includes a built-in 250mAh battery and supports external expansion batteries to ensure stable long-term operation. It has an onboard TF card slot for flexible storage expansion, meeting data logging and media file storage needs.
Equipped with an RTC8563 real- clock module, it provides accurate and date information and supports timed wake-, effectively achieving low-power operation.
The device integrates a buzzer for sound prompts and status feedback, and has a reserved Proto pin header expansion interface for freely connecting various custom sensors and expansion boards, suitable for diverse project development needs.

The body is built-in with four magnets and two M3 screw fixing holes, supporting magnetic placement and screw installation, greatly broadening usage scenarios.
This product can be applied to IoT setups, embedded development, environmental sensing monitoring, terminal data collection, and various project scenarios.
Specifications:
SoC: ESP32-S3FN8
Flash: 8MB
6-Axis Attitude Sensor: BMI270
MEMS Microphone: SPM1423
Clock Chip: BM8563
Battery Capacity: 250mAh
Infrared Remote Distance: 180: 330CM (straight ), 90: