Desktop Motherboard CPU Tester Test Card with LED Light for AM3 Motherboard

Desktop Motherboard CPU Tester Test Card with LED Light for AM3 Motherboard Popis

Full support for AM3 motherboards of various chipset
Accurate and fast test of various voltages and signals the motherboard
Detect open and short circuits of the BGA and CPU socket, and use LEDs to indicate each bus and control signal.
It is convenient and intuitive to replace the traditional multimeter.
It is an indispensable tool for repairing the motherboard.

Specification:
Material: PC
Interface: for BGA AM2
Scope: desktop

Instructions for use:
1. Install the (CR2032, 3.2V) battery by yourself. Insert the tester to the corresponding motherboard to judge the open and short circuit of the bus. If the light is not for , check if the BGA and CPU seats are open and shorted. Too bright, check if the light is shorted to the power supply.
2. There is a band adjustment for in the upper right corner of the tester, which can adjust the brightness of the bus input and output part indicators according to the motherboard of different chipset.
3. Connect the main board and the power supply, and use an oscilloscope to check whether the test signal between the top test lamp and the battery holder of the tester is reset, and the test voltage is normal.

4. This tester can also be used as a load and resistance card.

Note:
1. Users need to purchase (CR2032, 3.2V) battery into the tester slot.
2. Motherboard dedicated for AM3 interface, does not support sockt 940 motherboard.
Color: As Shown

Package Contents:
1*Test Card