Sorry, this item is temporarily out of stock.
DIY Electronic Kit LED Thumb Flowing Light Production Kit Light-Emitting Diode Microcontroller Soldering Practice Kit
Podobné produkty, které by se vám mohly líbit
Would you like us to let you know when it's back?
Shrnutí
- The products which are suitable for electronic enthusiasts to study and repair circuits. The installation of the circuit requires the buyer to have experience in the circuit.
- This circuit is an innovative design for dynamic electronics. After being powered on, the thumb like pattern composed of 81 LEDs presents various flashing effects. Press button S2 to adjust the water flow speed.
- Note: This is DIY kit, not a finished product. You will need to solder it yourself.
- Installation precautions: All light-emitting diodes and microcontrollers have polarity components. Be careful not to install them upside down. If you need other colors or colorful effects, just replace the LED.
- Electronic Soldering Practice
DIY Electronic Kit LED Thumb Flowing Light Production Kit Light-Emitting Diode Microcontroller Soldering Practice Kit Popis
The products which are suitable for electronic enthusiasts to study and repair circuits. The installation of the circuit requires the buyer to have experience in the circuit.
This circuit is an innovative design for dynamic electronics. After being powered , the thumb like pattern composed of 81 LEDs presents various flashing effects. Press button S2 to adjust the water flow speed.
Note: This is DIY kit, not a finished product. You will need to solder it yourself.
Installation precautions: All light-emitting diodes and microcontrollers have polarity components. Be careful not to install them upside down. If you need other colors or colorful effects, just replace the LED.
Introduction to Circuit Principles
81 LEDs are connected to a dedicated microcontroller DX158 through a combination of rows and columns, and are scanned and driven to light in the desired way through the microcontroller program. The microcontroller program in this kit has been burned and welded to produce the desired effect.
DC1 is small socket, It can be powered by 4-5V , and can be powered by any 5V charging . ( 5V charging Not included).
S1 power , C1 is a backup filter capacitor, which generally does not need to be installed and is not provided in the kit, which does not affect the effectiveness of use.
Color: Black
Material: PCB
Package Contents:
1* DIY kit
1* Power cable
Podrobnosti
| OPC | PTQDQCF |
|---|---|
| Kódy | 4713568465995 (EAN) |
| Informace o produktu a bezpečnosti |
Produktová data
| Height | 3cm |
|---|---|
| Width | 9cm |
| Length | 11cm |
| Weight | 0.049kg |
| Colour | Black |
| Material | PCB |