Obrázky produktu
I2C Bidirectional Current Voltage Power Monitor Sensor Module Drift Board for Raspberry Pi Metering Projects
Nové
Skladem
Proč si zamilujete nakupování na OnBuy:
- Získejte Cashback při každém nákupu – využijte jej okamžitě při další objednávce
- Doprava zdarma – u milionů položek na celém webu
- Zákazníci nás mají rádi – 132,000 recenzí s hodnocením “Vynikající”
119,51 Kč
197,19 Kč
Sleva 39 %!
+200,05 Kč za doru en
1%
Získejte 1,20 Kč okamžitě
Zjistěte více
Ceny zboží prodávaného na OnBuy jsou zobrazeny včetně DPH.
Možnosti platby bez úroků k dispozici
Zobrazit kompletní popis a podrobnosti o produktu
Doručení: Standardní (200,05 Kč) | pát 4 - čtv 10 zář
Prodává: Hoeappt
Vrácení zboží: 30 dní
180denní ochrana platby
Popis a podrobnosti
Shrnutí
- This I2C bidirectional current, voltage, and power monitoring sensor module is designed specifically for precise energy measurement and power management in DIY electronic projects. Each module is equipped with a high-precision zero drift amplifier, making it an ideal choice for battery monitoring and power analysis.
- Each sensor board is integrated with the INA219 chip, which supports bidirectional current detection, allowing you to monitor the charging and discharging currents in a single circuit. These modules provide digital outputs through the I2C interface and can be easily integrated with general-purpose microcontroller platforms.
- These current and voltage monitoring modules are fully compatible with Arduino, Raspberry Pi, and other popular development boards. Clear pin labels and standard 0.1 inch pin heads facilitate quick prototyping of breadboards and can be permanently installed in customized PCBs or project enclosures.
- The zero drift architecture ensures long-term measurement stability and low offset, which is crucial for accurate current and power calculations in low current or low voltage systems. This makes these modules particularly useful in IoT devices, solar charging systems, and various power management projects.
- Simply connect VCC, GND, SDA, and SCL, configure the I2C address in the code, and start reading current, voltage, and calculated power values using widely available example libraries and sketches.
I2C Bidirectional Current Voltage Power Monitor Sensor Module Drift Board for Raspberry Pi Metering Projects Popis
This I2C bidirectional current, voltage, and power monitoring sensor module is designed specifically for precise measurement and power management in DIY electronic projects. Each module is equipped with a high-precision zero drift amplifier, making it an ideal choice for battery monitoring and power analysis.
Each sensor board is integrated with the INA219 chip, which supports bidirectional current detection, allowing you to monitor the charging and discharging currents in a single circuit. These modules provide digital outputs through the I2C interface and can be easily integrated with general-purpose microcontroller platforms.
These current and voltage monitoring modules are fully compatible with , Raspberry Pi, and other popular development boards. Clear pin labels and standard 0.1 inch pin heads facilitate quick prototyping of breadboards and can be permanently installed in customized PCBs or project enclosures.
The zero drift architecture ensures long-term measurement stability and low offset, which is crucial for accurate current and power calculations in low current or low voltage systems. This makes these modules particularly useful in IoT devices, solar charging systems, and various power management projects.
Simply connect VCC, GND, SDA, and SCL, configure the I2C address in the code, and start reading current, voltage, and calculated power values using widely available example libraries and sketches.
Color:
Material: PCB
Package Contents:
1 * module 1 * pin 1 * interface
Podrobnosti
| OPC | PVHHMFV |
|---|---|
| Kódy | 6033687960217 (EAN) |
| Informace o produktu a bezpečnosti |
Produktová data
| Height | 1cm |
|---|---|
| Width | 3cm |
| Length | 3cm |
| Weight | 0.01kg |
| Colour | Blue |
| Material | PCB |
Porovnejte prodejce pro I2C Bidirectional Current Voltage Power Monitor Sensor Module Drift Board for Raspberry Pi Metering Projects
- Nové od 319,56 Kč
| Prodejce | Hodnocení | Záruka | Vrácení zboží | Cena | Doručení | Celkem | Množství |
|---|---|---|---|---|---|---|---|
|
Odesláno z:
|
(139 recenzí) | - |
30 dní
Vrácení zboží zdarma Ne
|
119,51 Kč
|
+200,05 Kč Delivery
Odhadované doručení:
4-10 zář
|
319,56 Kč
|
Získávejte odměny při nákupu s okamžitým Cashback na vše.
Žádný háček, žádné náklady
- Připsáno na váš účet OnBuy
- Využijte je při dalším nákupu
- Ušetřete nebo si je vyberte
Staňte se Cashback VIP
Už po 1 nákupu získáte lepší nabídky a ceny