Wireless Remote Control Relay + 4CH Receiver & Transmitter 433MHz for Electric Doors/Access Control Switches DC12V

Wireless Remote Control Relay + 4CH Receiver & Transmitter 433MHz for Electric Doors/Access Control Switches DC12V Popis

Mainly used in electric doors, windows, lifting equipment, gates, elevators, industrial control, and security industries.
When used with a remote control, it can form a complete wireless intelligent remote control system. Its applications are very wide, especially suitable for converting imported wired door and window control systems and burglaralarm systems from wired to wireless.
Operating Voltage: DC12V/DC24V Operating Frequency: 433MHz
Output Methods A. Self-locking - Connect positions 1-2 using a shorting cap. B. Non-locking - Leave shorting cap unconnected; positions 1, 2, 3, and 4 are not connected. C. Interlocking - Connect positions 3-4 using a shorting cap.

Explanation of Self-locking/Interlocking/Jog:

Interlocking: Pressing a corresponding button the remote activates the corresponding relay. Pressing another button the remote deactivates the relay.

Non-locking/Jog: Pressing a button the remote activates the corresponding relay. Releasing the button deactivates the relay.

Self-locking: Pressing a button once activates the relay. Pressing the button again deactivates the relay.

III. Learning/Clearing Methods and Steps

1. Press the learning button once; the indicator light will turn off. Release the button. Press any button the remote; the indicator light will flash several times and then turn off, indicating successful learning.

2. Can learn more than 12 different address codes for wireless remote controls of the same frequency, such as 2262 chips and 1527 chips.

3. Clear: Press and hold the learning button for approximately 8 seconds. The indicator light will change from to off and then back to , indicating that all stored information has been successfully cleared.
Color: White
Material: plastic
Specification: DC12V