7-26V 2-6S 5A BEC Module Welded Capacitor 5V/ 6.2V/7.4V/9V Optional Output Voltage for RC Fixed Wing Airplane

7-26V 2-6S 5A BEC Module Welded Capacitor 5V/ 6.2V/7.4V/9V Optional Output Voltage for RC Fixed Wing Airplane Beschreibung

7-26V 2-6S 5A BEC Module Welded Capacitor 5V/ 6.2V/7.4V/9V Optional Output Voltage for RC Fixed Wing Airplane
Item name: BEC
Input voltage: 7-26V, 2-6SLiPo (The input voltage must be higher than the set output voltage +0.8V, otherwise the output input voltage is the input voltage minus 0.8V.)
Output voltage: 5V, 6.2V, 7.4V, 9V optional. (The default output is 5V, and the other three voltages can be selected for output through jumper pads.)
Adopt MP9744 chip. This is an integrated step-down controller and MOSFET high-efficiency integrated switch step-down chip. The maximum instantaneous output current is 7A, with no heat dissipation, it can continuously output 4A, and with heat dissipation, it can continuously output 5A.
Output current (continuous):
1. No heat dissipation (no heat sink, no wind): 5V4A, 6.2V4A, 7.4V4A, 9V3.5A
2. With heat dissipation (with heat sink or wind): 5V5A, 6.2V5A, 7.4V5A, 9V4.5A
Output current (instantaneous): 5V7A, 6.2V7A, 7.4V6.5A, 9V6A
Immersion Gold: 1u
Size: 29x17.8x5.4mm
PCB board thickness: 16mm
Weight: about 4.6g (including capacitor)
Used for RC drone model airplane.
Select voltage output through jumper pads (if you need 5V voltage output, please skip this step):
Do not short circuit jumper pads, default output 5V.
Select other output voltages by short circuiting jumper pads.
1. When selecting the 6.2V solder pad, the actual output voltage is 5.9V;
2. When selecting the 7.4V solder pad, the actual output voltage is 6.9V;
3. When selecting the 9V pad, the actual output voltage is 8.9V.
Note:due to different production batches, the printed characters are different, which does not affect the use.
Colour:As Shown
Material:Metal+Plastic
Package Contents:
1 * Module(no connection wire)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.