Blow-Off-Ventil-Mod-Stecker für 2013-2021

Blow-Off-Ventil-Mod-Stecker für 2013-2021 Beschreibung

[Compatible Models]Precision Machined Aluminum Billet Plug for 2013-2020 for 2.7 or 3.5 E, Note: This does to 2012 , they use a different configuration with 2 mechanical exhaust valves
[Use]Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine.
[Easy Installation]There is a large hose connecting the intake system to the exhaust valve with quick connect, / coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. , the VTA mode is complete!
[DESIGN]This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a inlet temperature. This reduce inlet temperature and improve overall performance over the entire operating range. The best part is that you can get a clean exhaust valve sound and know you have without having to recycle hot air and introduce unnecessary heat into the engine.

Type:Blow off Valve
Part Number:for 2013-2021 3.5l 2.7l
Installation Instructions:
Find the blow valve tube coupler
Rotate the coupler to remove the exhaust pipe
Now disconnect the BOV hose from the intake pipe
Install the VTA MOD into the pipe before venting the valve
Under the truck behind the driver's side plastic dust cover
Colour:Black
Material:Metal

Package Contents:
1 x Drain Valve Plug

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.