For CyberBrick 14500 7.4V 800mAh Li-Ion Battery for 3D Printing Model

For CyberBrick 14500 7.4V 800mAh Li-Ion Battery for 3D Printing Model Beschreibung

The 14500 7.4V 800mAh Li-ion battery provides high-performance, rechargeable power for portable devices. Similar in size to AA batteries, it offers higher voltage and density, suitable for devices requiring more power and longer runtime, such as flashlights and remote controls.
Short Circuit Protection: The battery has protection for short circuits to prevent damage.
Overcharge and Over-discharge Protection: Protects the battery from damage caused by excessive charging or discharging.
Used with a Lithium Battery Charger with XH2.54 Connector, the 14500 7.4V 800mAh Li-ion battery enables efficient charging.(Battery Charger not included).
Used with a Power Module with 2Pin XH2.54 Connector, it is more convenient to the battery power..(Power Module not included).

Specification:
Product Model: PC003
Nominal Voltage: 7.4V
Nominal Capacity: 800mAh
Operating temperature: Charging:0~45; Discharging:-20~60
Charging Current: Standard Charging 160 mA; Max Charging 800 mA
Overcharge Voltage: 8.4V0.05V
Max continuous discharge current: 3A
Overdischarge Protection Voltage: 5.8V0.08V
OverCurrent Protection: 20A3A

Charging Precautions
Use only the officially supplied charger. The charger is not a toy.
The USB charger for this product only supports standard 5V 1-2A input. Please always use the original charger that meets the voltage/current requirements, or charge directly via a computer USB port. DO NOT use chargers with output higher than 5V or 2A (such as mobile fast chargers, 9V/12V adapters, etc.), as this may cause device damage, overheating, or even serious fire hazards.
DO NOT cover the device while charging, and keep it away from high temperature, humidity, or flammable environments. Never charge the device unattended.
DO NOT charge the