36V 350W Controller Dashboard Accelerator Scooter Replace Kit for E-Scooter Controller Accelerator Set

36V 350W Controller Dashboard Accelerator Scooter Replace Kit for E-Scooter Controller Accelerator Set Beskrivelse

IV. Product Function Operation Method
1. Power /off: long press 2 seconds/turn , long press for 2 seconds to turn off.
2. Gear: Double-click to change gears
3. Speed: Gear 1 10KM/H, the icon "ECO" the screen lights , 2 20KM/H, the icon "D" the screen lights , 3 30KM/H, the icon "S" the screen lights (with memory function, default to the gear used before the last shutdown).4. Instrument headlight: Single-click the button to turn the light;
5. Ambient light: Press the button 3 times to turn the ambient light;6. Tail light: Single-click the instrument button to turn the headlight/taillight, then click the instrument button again, the headlight/taillight goes out, and the brake taillight flashes.

7. Miles: Press the button 4 times to kilometers
8. Riding mode: 1. Default zero start mode, press 5 times to zero/non-zero start.
9. Braking mode: Hall electronic linear brake.
10. Clear : Press the button 8 times to hear a long beep (change the phone to operate this function).
11. APP functions: 1. Turn /off cruise control. 2. Kilometer/mileage . 3. Zero/non-zero start mode. 4. Fault detection. 5. Current mileage, total mileage. 6. Turn /off headlights. 7. Lock the car to prevent theft. 8. Cycling map (mobile phone needs to be positioned) 9. Three gear speeds can be set.
12. Automatic shutdown after 5 minutes of no operation
13. Battery display
1) Voltage: below 32V, the first light flashes red
2) Voltage 32V-33.8V, the first light is always
3) Voltage 33.8V-35.5V, the second light is always
4) Voltage 37V-35.5V, the third light is always
5) Voltage 37V-38.3V, the fourth light is always
6) Voltage 38.3V, the fifth light is always
7) Voltage is lower than 31V, or minus 1V, the motor stops
Colour:Bla