CANable V2.0 CANbus Transceiver USB to PCAN Protocol Analyzer Adapter CAN2.0 Serial Controller

CANable V2.0 CANbus Transceiver USB to PCAN Protocol Analyzer Adapter CAN2.0 Serial Controller Beskrivelse

Product Introduction: MKS CAN able V 2.0 module is an upgraded version of MKS CAN able V 1.0. CAN able 2.0 is a small, low-cost, open source USB to CAN analyzer. CAN able enumerates as a virtual serial port your computer and acts as a serial for the CAN bus interface.CAN able 2.0 supports standard CAN 2.0A, CAN 2.0B and CAN FD.
When using the candleLight firmware, CAN is enumerated as a native CAN interface for Linux.
The CAN able analyzer is compatible with for ARM-based embedded platforms, such as: for Raspberry Pi, for Raspberry Pi Zero, for O DROID, for Beagle Bone, etc., making it very suitable for integration into products.

Product Features:
1. Support for CAN 2.0A, CAN 2.0B, baud rate to 1M;
2. Support candleLight, sl can firmware, sl can initially supports CAN-FD, test rate to 2M/5M baud rate;
3. The terminal resistor can be selectively enabled/disabled through the short-circuit cap;
4. Supports Type-C USB interface, online firmware upgrade and DFU mode firmware upgrade;
5. Uses high-performance ARM Cortex-M4STM32G431C8T 6 processor, operating frequency to 170MHz;
6. Provided Schematic diagram, firmware and source code, host computer, etc. The information is complete and easy to use.
analyzer board Version: V2.0
Material: abs
colour: As Shown

Package Contents:
1 x usb data cable
1 x 3pin double Dupont cable
1 x analyzer board