DC10-55V 30A Adjustable PWM Motor Speed Controller LCD Digital Display 0- Speed Governor with Remote Control

DC10-55V 30A Adjustable PWM Motor Speed Controller LCD Digital Display 0- Speed Governor with Remote Control Beskrivelse

Intelligent LCD screen with backlight can display working , speed percentage, current mode, forward/reverse status, etc. Equipped with wireless remote control. Multiple limit modes available. Can set slow start and slow stop . Adjustable upper and lower speed limits. The total working can be set to stop at the designated .
Support dual speed control for separate speed regulation of forward and reverse speeds.
There are two modes available: manual and automatic. The automatic mode is fully automatic for forward and reverse rotation within the set .
Gently touching the to between forward and reverse rotation, and jogging acceleration and deceleration solves the problem of traditional potentiometers being prone to damage.

Input voltage: DC10-55V (specific voltage is equal to the rated voltage of the motor)
Output voltage: linear under load
Instantaneous current: 50A
Continuous current: within 30A
Forward to reverse: supported
Wireless remote control: Yes
Timing: Yes
Limit function: Yes
Slow start and slow stop: configurable
Speed digital display: 0-100 percentage meter
Speed regulation type: current regulation
Speed regulation method: jog+-
Speed regulation range: 0-
Control frequency: 15KHZ
Wiring type: fence type terminal blocks
Supporting motor: Brushed motor
Module size: length x height x depth 105mm x 70mm x 95mm
Net weight of product: 275 grams
Panel opening: length x width 98mm x 63mm
Installation method: embedded
Long press and hold the MENU key to turn off and turn the backlight
To reverse start, press FWD/REV to reverse start
Attention:The input must be divided into positive and negative. The input voltage must be equal to the rated voltage of the motor (within 10-55V)
For example,