Foldable shower barrier and retention system for dams, keeping water within the threshold (1m) -

Foldable shower barrier and retention system for dams, keeping water within the threshold (1m) - Beskrivelse

Dam size: 100 x 3 x 5 cm. It can be easily cut to the length you need. Long, flexible design creates all kinds of shapes. The shower barrier and retention system keeps water inside the threshold. Ideal for curbless showers and other areas where water must be contained. Installation Steps and Attentions: (1) First, please clean the floor thoroughly and keep it dry. This step is very important! (2) Afterwards, determine the installation position of the water retaining strip, and then mark it on the ground with a pen. (3) Roast the adhesive tape on the back of the water retaining strip and stick it on the ground according to the previously marked position. (4) Then use glue to fill the area where the two ends of the tape contact the wall to seal it, and roast the excess glue to make the contact smooth. (5) Finally, to prevent it from falling, let it dry within 24 hours and avoid contact with water.