LCPI RK3308B Quad-Core CPU Development Board DDR3-2Gbit IoT Development Board,Support Ethernet Port and Wifi

LCPI RK3308B Quad-Core CPU Development Board DDR3-2Gbit IoT Development Board,Support Ethernet Port and Wifi Beskrivelse

Micro- card holder: used for card image burning
Quad-core ARM Cortex-A35 CPU, ARM architecture v8-A instruction set
Supports multiple interfaces such as GPIO, UART, SPI, I2C, MIC, etc., convenient for development and debugging
Onboard DDR3-2Gbit storage SDRAM memory, clock frequency 1.066GHz
Onboard 2.4G wireless transceiver chip and Ethernet transceiver support WIFI and ETH (rate 100M)

Type-C port: power supply port + ADBO
UART serial port: connect USB to TTL module for serial port debugging (pins 2-4-6-8 correspond to: 5V-GND-TX-RX)
Reset button: reset button
maskrom button: by default, SDNAND starts before TF card. Pressing the maskrom button can ignore NAND flash memory when ROCK PiS starts (need to prepare Flash and Q15 transistors for use, see schematic diagram 5_TF_USB for details)
Wireless transceiver chip: RTL8723DS ETH network port: 100M network port
SPI_Flash memory: used for SPI NAND FLASH image burning (need to prepare)
DDR3 memory: SDRAM_K4B2G1646E
Colour:As Shown
Material:Plastic

Package Contents:
1 * Development Board