PH Meter Calibration Solution ORP Tester Calibration Solution Buffer Solutions,PH 7.0

PH Meter Calibration Solution ORP Tester Calibration Solution Buffer Solutions,PH 7.0 Beskrivelse

How to Calibrate the pH Meter:1. Rinse the electrode with clean water and wipe it dry. Turn the pH meter and adjust to pH mode.
2. lmmerse the electrode in the pH buffer solution and wait for the reading to stabilize. Press and hold the "CAL"button for 5 seconds the screen will display "CAL" and the pH calibration is complete when pH flashes 3times.
3. Rinse the electrode with clean water and wipe dry.
4.Repeat the above calibration steps to calibrate pH

Storage:
Buffer solutions should be stored in a dark, cool place (not in the refrigerator and at temperatures no higher than 25C) away from direct sunlight to prevent photochemical degradation. In addition, buffer calibration solutions should be protected from carbon dioxide from the air and stored in tightly closed containers.
Colour:As Shown
Material:plastic
type:PH 7.0

Package Contents:
1 set x pH Meter