Produktbilleder
Sorry, this item is temporarily out of stock.
Stamp-S3Bat DIP Embedded Core Module with Integrated Power Management ESP32-S3 M5StampS3 BAT Module with 2.54 Header Pin
New
Lignende produkter, vi tror du vil kunne lide
Would you like us to let you know when it's back?
Beskrivelse og detaljer
Oversigt
- Stamp-S3Bat DIP is an embedded core module with integrated power management. It features the ESP32-S3-PICO-1-N8R8 main controller, supporting 2.4GHz Wi-Fi with built-in 8MB Flash and 8MB PSRAM.
- The module leads out 11 GPIOs and 1 wake-up IO, equipped with a 24P BTB connector (supporting DVP interface). An onboard battery power interface is provided for connecting an external 3.7V lithium battery.
- It integrates the M5MP1 multi-stage power control design, supporting power input/output control, lithium battery charging control, and status detection for input voltage and battery voltage.
- It also supports external low-power wake-up; after the main controller enters low-power sleep mode, the power can be woken up via the external wake-up IO.
- Featuring a programmable RGB LED, the Stamp-S3Bat DIP version comes with pre-soldered 2.54mm standard pitch headers, allowing integration into applications via PCB insertion, breadboard connection, or Dupont cables to help developers quickly build IoT applications.
Stamp-S3Bat DIP Embedded Core Module with Integrated Power Management ESP32-S3 M5StampS3 BAT Module with 2.54 Header Pin Beskrivelse
Stamp-S3Bat DIP is an embedded core module with integrated power management. It features the ESP32-S3--1-N8R8 main controller, supporting 2.4GHz Wi-Fi with built-in 8MB Flash and 8MB PSRAM.
The module leads out 11 GPIOs and 1 wake- IO, equipped with a 24P BTB connector (supporting DVP interface). An onboard battery power interface is provided for connecting an external 3.7V lithium battery.
It integrates the M5MP1 multi-stage power control design, supporting power input/output control, lithium battery charging control, and status detection for input voltage and battery voltage.
It also supports external low-power wake-; after the main controller enters low-power sleep mode, the power can be woken via the external wake- IO.
Featuring a programmable RGB LED, the Stamp-S3Bat DIP version comes with pre-soldered 2.54mm standard pitch headers, allowing integration into applications via PCB insertion, breadboard connection, or Dupont cables to help developers quickly build IoT applications.
Features:
ntegrated ESP32-S3--1-N8R8 controller
8MB Flash and 8MB PSRAM
24P BTB connector (supporting DVP interface)
M5PM1 low-power power management
11 x GPIO leads + 1x Wake- IO
1x RGB LED
2.54mm standard pitch headers
Power Supply: 3.7V battery power supply (not included), USB Type-C / 5V
Applications: IoT project development
Specifications:
SoC: ESP32-S3--1-N8R8 @ Dual-core Xtensa LX7 processor, frequency to 240MHz
Flash: 8MB
PSRAM: 8MB
Wi-Fi: 2.4 GHz Wi-Fi
Input Power: 3.7V Battery / USB Type-C / 5V
RGB LED: 1 x WS2812
Battery Interface: SH1.0
Pad GPIO Leads: 11x GPIO (G1/G2/G3/G4/G5/G6/G7/G8/G9/G10/G11) + 1x Wake- IO (PY_G4_WAKE)
BTB Interface GPIO Leads: 19x GPIO (G40/G38/G12/G13/G14/G15/G16/G18/G21/G46/G45/G41/G43/G42
Detaljer
| OPC | PXP2PGV |
|---|---|
| Koder | 4711357998426 (EAN) |
| Produkt- og sikkerhedsoplysninger |
Produktdata
| Height | 3cm |
|---|---|
| Width | 4cm |
| Length | 5cm |
| Weight | 0.0095kg |
| Colour | Black & Gray |
| Material | PCB+Plastic |
Would you like us to let you know when it's back?
Stamp-S3Bat DIP Embedded Core Module with Integrated Power Management ESP32-S3 M5StampS3 BAT Module with 2.54 Header Pin
New
Du kan også lide