XY7025 CNC Buck Adjustable Regulated Power Supply Constant Voltage and Constant Current Module 70V/25A/1750W

XY7025 CNC Buck Adjustable Regulated Power Supply Constant Voltage and Constant Current Module 70V/25A/1750W Beskrivelse

CNC step-down power supply, constant voltage, constant current, constant power.
Support mppt solar charging
Support firmware upgrade
Support serial communication, standard Modbus protocol
Independent dual serial , serial TTL and onboard 485 communication.

Product name: buck power supply
Model: XY7025
Input voltage: 12-85.00V
Output voltage: 0.0-70.00V
Output current: 0-25.00A
Power output:1750W
Resolution of voltage: 0.01V
Storage data group: 10 groups
Efficiency of conversion: About 95%
MPPT function: Support MPPT solar charging
Accuracy of voltage: +0.5%+1 word
under-voltage (LVP):(Adjustable 10-95V, default 10V)
over-voltage (OVP):(Adjustable from 0 to 72V, default is 72V)
over-current (OCP):(Adjustable from 0 to 27A, default 27A)
over-power (OPP):(Adjustable from 0 to 2000w, default is 1800W)
over-temp (OTP): Adjustable from 0 to 110c, default is 95 C
over- out (OHP): 1 minute -99 hours 59 minutes, off by default
over-capacity (OAP):0-9999Ah, off by default
over- (OPH):0-4200KWh, off by default
Precautions:
1. The input cannot be connected to AC power, let alone 220V AC power
2. The maximum input voltage cannot exceed 90V. It is recommended to use it within 85V, and the positive and negative poles cannot be connected in reverse.
Colour:Black
Material:PCB+electronic components

Package Contents:
1 x buck power supply